Performance Parts

DCVING

Member
Joined
Jul 20, 2004
Here's the deal !!

Back in October my T was stolen!! I found the KIDS who stole the car and they have been arested and charged with grand theft. I have recovered some of the parts and am picking them up from the police station impond this weekend or early next week. I am getting out of Tubo Buicks for a while and would'nt mind sitting on this stuff for a while BUT I am willing to sell everything. I perfer to sell as a whole and not have to part this stuff out.

Here's what I have.

Fully Built 109 with .020 over JE pistons, Pro-gram steel mains 2 center's, stock crank 10/20, stock rods all done, ARP main studs, SPS rod bolts, motor was balanced and is within a few grams on each cyl.

Dale Cherry ported and polished Irons, Bigger valves, Viton seals int and exhaust, de-shrouded around the valves. 100lb comp cams springs, Receiver grooved for 1007 felpro's These heads have not been flowed but were on a 10.0 car before I got them.

Hand ported intake manifold matched to the heads.

Modified front cover with a stock meling oil pump, setup for external oil cooler.

Comp cams 212/212 non-roller cam, degreed in.

F.A.S.T 60lb injectors.

Turbo is a TE-61

Motor is complete top to bottom everything has less than 3000k miles on it. It was broken in properly and runs super strong. In a 3500lb car it went 11.8 on only 17psi of boost on drag radilas and pump gas.

Fully built 200r4 built by Otto in CT. Stage Right Transbrake, all the good internals, stock pan, alto red clutches, alto wideband, th200 servo, ect ect. Just gone through and replaced all the seals and cluches. No more than 5k on this. Also has a Vigalante 0 pump 3200 stall single disc too.

Terry Huston 3" DP with the cut out. Yes its stainless!!

Hooker Cat Back 2.5 with Magnaflow Stainless Muffler's

Stock radiator in good shape.

stock ecu and the cut wiring harness it was attached too.

4 Street wheels and tires,
American Racing AR 23's I think. 15x7 and 15x8 fronts have 215/70/15 BF's brand new, The rears are Nitto Drag 275/60/15 with 70% tread left.

Drag Wheels are Weld pro stars 15x8 with 28x10.5x15 M/T slicks 50% used. the rims have a 4" BS and do require spacers on a G body.

I also have more parts like UMI upper's with little use, 2 alluminum drums that are at their max dia. 2- Z-28 Hollow huge front sway bars in good shape, Quick ratio power steering box, extra stock heads and I am sure I have more.

If interested please E-mail me.

Like I said I would like to sell everything together for someone who needs to complete a rolling chassis project or just to drop in a low 11sec combo into there own ride.

There is a video and many pics of the car on the board here for the video just search DCVING video you can see the car in street trim on a street night with bad track conditions.


Many pics are availabe


Thanks Jon call my cell if you have any questions too. 508-991-0105
 
If you decide to sell separately I might be interested in the radiator and injectors. Thanks. james
 
how do you know if the motor is good after the theft of the car ?? what did you want for everything ?? :cool:
 
how do you know if the motor is good after the theft of the car ?? what did you want for everything ?? :cool:


I checked it over and everything seemed to be in working order. The turbo outlet wasnt white like they beat on it and from the investigation they just took the car drove it 5 miles to there place to strip it. They did spray paint the headers and the tranny black and cut the hoses and all that good stuff. The a/c delete pully is bent and would need replacing but I dont think anything is hurt. If you want it all I am willing to sell it for $ 5,000. And you get everything period. I have pics of the stuff from the impond yard. The engine was and has been covered the whole time and all the electronics have been inside the station.
 
Bad news. After all the dust has settled, if still left I'm interested in DP, exhaust, injectors and rear aluminum drums. Location??
Thanks, DGC
 
I am very interested in the entire package, what is the rock bottom price and whats included. Woulld like pics if possibble
 
I am very interested in the entire package, what is the rock bottom price and whats included. Woulld like pics if possibble

The price is 5K, I will send you pics when I get to my home computer. You get....

Built Motor, w/new TE-61, top to bottom complete drop in.
Built tranny with Vigalente O pump 3200 stall, Brake too.
Strech IC
THDP w/ cut out
radiator
fan
2.5" cat back hooker with magnaflo's
weld pro stars w/ slicks
american racing wheels and tires for the street BF's F Nitto drags R
2 rear upper UMI arms
2 z-28 big hollw sway bars
1 fast ratio steering box
2 stock heads
stock ecu
new a/c mass air
lt1 mass air and translator
chrome maf pipe
chrome 3" up pipe
chrome turbo sheild
new coil pack
the cut engine harness
misc pieces

Im sure there is more too. I am firm on the price considering almost all the hard parts have less than 5k miles on them. This is a low 11 sec combo for half of the price to build it. The motor is built to handle 10s with ease! Here is the car it came from
 

Attachments

  • jonsT.jpg
    jonsT.jpg
    72.8 KB · Views: 760
ttt

Seems like some people dont read right and this is for those selected.

I AM SELLING THIS STUFF AS A COMPLETE PACKAGE !!!!

If I dont, then I wont sell it at all.
 
Seems like some people dont read right and this is for those selected.

I AM SELLING THIS STUFF AS A COMPLETE PACKAGE !!!!

If I dont, then I wont sell it at all.

Your very first post stated, and I'm quoting your own words. "I prefer to sell as a whole and not have to part this stuff out". If you had said you were only selling as a whole and not parting anything out, I wouldn't have made an offer on your turbo. Yes I can read.
 
snip...
I perfer to sell as a whole and not have to part this stuff out.
....snip

snip....
Like I said I would like to sell everything together for someone who needs to complete a rolling chassis project or just to drop in a low 11sec combo into there own ride.
...snip

Well don't I feel like a horses ass for not understanding that under no circumstances would you be willing to separate. :confused:
 
Top