C Convertedfromv8 Member Joined Dec 22, 2015 Jun 9, 2020 #1 Any luck doing this ? It looks like the upper arms don’t carry any load... any pics of boxed arms ? They work ok ?
Any luck doing this ? It looks like the upper arms don’t carry any load... any pics of boxed arms ? They work ok ?
pacecarta LOGGED OUT Staff member Joined Aug 1, 2003 Jun 9, 2020 #2 hrpartsnstuff sells a DIY precut kit to weld in https://gbodyparts.com/hrpartsnstuf....html?osCsid=ac1d401e19073a095683367f8ce4b6deat that point you should also replace the bushings.. by then you might be better off buying a tubular control arm kit
hrpartsnstuff sells a DIY precut kit to weld in https://gbodyparts.com/hrpartsnstuf....html?osCsid=ac1d401e19073a095683367f8ce4b6deat that point you should also replace the bushings.. by then you might be better off buying a tubular control arm kit
C Convertedfromv8 Member Joined Dec 22, 2015 Jun 9, 2020 #3 I was just planning on tracing the arms with cardboard and cutting my own metal