Small turbo/small LS

[jragracer]

We know that most guys want to go fast, but will a 6262 ddb. be enough turbo for a bone stock 4.8/5.3 long block.Looking for 600/700 at the flywheel. Car will be use for bracket racing/7.00 index racing.also will 65lbs injectors be enough?

Posted from the TurboBuick.Com mobile app

 

[boostedyards86]

I'd consider using that as twins...

 

[BEATAV8]

Use a larger turbine. No reason it wouldn't spool it. Lower backpressure will be your friend.

 

[jragracer]

You think The mighty Bison could handle that task.?

Posted from the TurboBuick.Com mobile app

 

[bison]

You think The mighty Bison could handle that task.?

Posted from the TurboBuick.Com mobile app

Personally I'd increase the compressor size also if you are planning on being over 5000rpm. You could be all in with the 62mm on an engine that size very easily. 70lbs/min and it's starting to throw in the towel. If it's 93 octane and you are keeping boost around 10-12psi you will be gtg with the 62


BPE2013@hotmail.com