Fuel feed question

[FastRegalWE2]

I just picked up a set of Champion fuel rails to work with stock regulator, and -8 AN line from the dual Walbro 255LPH pumps, question is, should I T the line up by the fuel rail and feed it from both sides? Since its going to return through the stock line (for now)

 

[boostingbuick]

The pumps should have one outled to the filter. Buy a good inline filter and run a single -8 to the rail without the regulator and have it crossover to the other rail leaving the regulator at the end of the system. Mallory makes a duel inlet and outlet filter housing that you can run two in and one out if that is the route you will take. hope this helps.