FAST-Nitrous wiring

[foxspy]

Hey guys,

Can someone go through which wires go where on from the FAST ecu to the nitrous system? This is on a bank-to-bank ecu.

I have a NX Hitman plate kit, purge, fuel pressure safety switch. I will be using the relays that came w/ the kit.

Any help would be much appreciated.

Thanks.

 

[HighPSI]

NOS Plug:

A: Pink (pin L2)- needs to see 12 volts when NOS system is armed
B: White (pin T3)- grounds relay to activate 1st stage of NOS
C: Blue (pin W3)- grounds relay to activate 2nd stage of NOS

 

[Greg Kelley]

Like Cal said:

Pink goes to output side of a timer if you use one or to a push button on the steering wheel.

White to the relay from your kit. It would go on one of the terminals (I use 86) to use the ground it is carrying to close the power side of the relay to send the high amperage 12+ to the nitrous soleniod.

If ya have only one stage then skip the blue.