Search results

  1. K

    Intermittent miss on number 6 cylinder low voltage on A11 terminal ecm

    Ive been fighting an intermittent miss on cylinder #6, i changed every sensor checked grounds checked vacuum changed plugs tryed 3 different modules and coils different ecm different chip, i decided to probe the ecm pins and found terminal A11 cam high only had 6.70v. running should be around...
  3. K

    .040 pistons

    Looking for a set of .040 forged pistons for a stock stroke crank.
  4. K

    1967 chevy cst swb

    C 1967 Chevy CST short, wide, original 327 engine, 4 speed trans. Runs nice. Good project truck. $3700 785-483-8053
  5. K

    Torque plate

    Wanting to buy a steel torque plate for a 3.8 production block 8 bolt heads, or rent one thanks
  6. K

    .020 pistons

    I need a set of .020 pistons new or used, 1735 silvolite or equivilent. I broke a ring and ring land on one of mine, and im wanting to replace the whole set.
  7. K

    Blue steeringwheel

    Needing a blue steeringwheel, doesn't have to be a perfect one but a nice one for a driver. I have the horn button and the ring so i wouldn't need that. Thanks Kirk.
  8. K

    Deep sump oil pan

    Looking for a 20 bolt deep sump oil pan, RJC, KB, ATR or even homemade;)
  9. K

    D84 designers paint pinstripes

    I was wondering if anyone had any pictures of a 87 limited with the d84 paint option? I've got the upper color painted and was wondering how to mask off the header panel and the rear quarter panel extensions where the pinstripes go. I didnt know if the trunk is all one color, or if its both...
  10. K

    Needed 1 GTA front wheel non dimple

    I know this is a longshot, but i need 1 16x8 front gta wheel non dimple, or would consider a dimpled wheel too. If you have a pair of wheels i would consider that too. Its best to reach me @ 785-483-8053 or pm me, but sometimes my pm box don't work, so its best to call me. Thanks Kirk
  11. K

    Check this out

    :eek: photos
  12. K

    WTB 2 weld draglites 15x7

    Wanted 2 weld draglites 15x7 3.5 backspace.
  13. K

    Passenger side inner wheelwell

    Needing a passenger side front inner wheel well for a GN.
  14. K

    Bracket on passenger fender that holds map sensor

    Need the bracket that holds map, esc mod, fuel pump relay that mounts on passenger fender.
  15. K

    Heater box

    Is the GN heater box 1 of its own, or is some G bodies the same as the GN. My lower part of my heater box is broke, and the one i got is different than the one on the car.
  16. K

    Lower part of heater box

    Need the lower part of heater box, or the whole heater box that goes on the firewall.
  17. K

    Question on stock radio

    What is the orange and brown wire connector on the back of the radio for? Is it for the memory of the radio? I bought a GN without a radio and I was going to install the stock radio but all the connectors were cut off the harness for the radio. Must have had an aftermarket radio before,But i...
  18. K

    Carfax on a GN please

    I just bought a GN and would like to have a carfax on it before i sink a bunch of money into it. The car had some damage on the passenger side and would like to know. Vin.#1G4GJ1172HP459333. Thanks Kirk.
  19. K

    Charcoal canister

    Looking for a charcoal canister for a GN.
  20. K

    Passenger side upper GN door panel

    Looking for a passenger side upper door panel for a GN with electric windows. Doesnt have to be a perfect one, but a fairly good one.
  21. K

    Drip rail moulding

    Are the drip rail mouldings on a 86 grandprix the same as on a regal?,are all g body drip mouldings the same?
Top