Search results

  1. joed

    Engine guys please help!

    OK I'm hoping for some help from you engine guys. I have a fresh motor, basically stock with Comp 206/206 roller. Has maybe 10-20 hours driving around with some WOT's so rings should be seated and all broken in. stock shortblock, champion irons. Running rough, compression 120-130 psi with...
  2. joed

    Aftermarket shifter handle for stock shifter

    Is anyone using aftermarket handles on the stock TR floor shifter? Was looking at the MOMO in classic industries catalog, push button with chrome or black, also there was a Buick specific / billet version that was out for a while (N/A now) but a couple guys I know didn't like how they worked and...
  3. joed

    Lower fuel line connection... o rings?

    I hope this isn't already posted but can't find it. I'm reconnecting stock flexible fuel lines to the steel lines near power steering. I don't see any o rings on them. Do they need o rings? I can't imagine I took them off last year when I took it apart, but if I did, I can't find the old ones...
  4. joed

    3 Inch high flow cat needed

    Have ESP FMIC in nice condition with all parts, looks very similar to precision. Would be interested in a big neck stock stretch or aftermarket SLIC. I have several stock IC's so don't want more. Let me know what you have and if you want trade or $$. Will post pics of SLIC later. Thanks for looking.
  5. joed

    GNX's flooding BAT

    Have ESP FMIC in nice condition with all parts. Would be interested in a big neck stock stretch or aftermarket SLIC. Let me know what you have and if you want trade or $$. Will post pics of SLIC later. Thanks for looking.
  6. joed

    Need a brass T block to install an oil pressure sending unit off of the turbo feed line

    I'm looking for someone near this area. I'm thinking of buying a truck from a dealer and could use a car guy to check it out for me, maybe take for an inspection at local shop. Long story how I got onto this truck but now I am. PM me if you can help. Thanks, JoeD
  7. joed

    Hydraulic circuit diagram for TR 2004R

    Gone through the trans BRF VB with Bruce (WE4) and the rest of assembly with knowledgable support of local friend and Buick specialst, Phil@Master Tech. It's now fresh working, EXCEPT what seems to be the last issue. 2-3 upshift is very late at part throttle, around 3000-3200 rpm (around 1000...
  8. joed

    PowerLogger not reading AFR, #3

    Just put my wideband in the car, no reading in PL, showing 0.0002V in setup screen, should be 0-5V or ~2.3@ idle. Tested voltage at the input board and it's there. I can swap out the USB to PC....anyone have PL drop a channel before? Bad cable or input board? Is the cable to the input board...
  9. joed

    Wheel Well Moldings - Black

    Anyone have VG used or know where they sell new OE or Repro? Someone posted a set a while back but were never able to respond to me with info. Do G Bodies have them in common or specific to division? Thanks for any input.
  10. joed

    are you guys getting email notifications?

    I'm set up for email notifications for all my subscribed threads (by checking that little box "and receive email notifications"), have been getting them for a long time, and I really like when I flip over and look at new email and have a couple interesting titles from BOOST! However, as of 3/14...
  11. joed

    Opinions on valve springs for hyd roller cam/lifter/rocker street motor

    I'm finally finishing a freshened stock shortblock, low 11 second street motor for 100k miles;) we hope. 206/206 HYD roller cam, Tom at Champion used PAC 1201's I believe on my full port iron heads. Track maybe 3-4 times per year, may turn it up for a high 10 second pass one day. Is there a good...
  12. joed

    Used set roller lifters

    853s used but great shape bought from board member, $240
  13. joed

    LT1 3 inch MAF Identification

    I'm hoping someone can help me identify these apparently identical LT1 MAF's. I got the both used, and I was told by both sellers they were thought to be GM or Delco. However, I don't see any markings along those lines. I just found it weird that I got the identical unit from 2 totally...
  14. joed

    AEM 30-0300 Wideband wont fit gauge holder

    Never mounted the gauge that came with my old Innovate LC-1 for many years with out WB gauge, just logged in PL. The AEM Gauge is pretty nice, got the white face to match and I thought it would be nice to keep an eye on things. Pulled out all the dual gauge stuff, remounting with WB up in the...
  15. joed

    Driver Side A-pillar

    Looking for one, for under my 3 gage A-Pillar pod. Condition not too important.
  16. joed

    Big neck stock IC - Mease Performance

    Stock IC with big neck. very good condition. The first row of fins on the back side are bent from when my IC fan threw a blade. Otherwise, very nice. $250 + fees and shipping. New price $225.
  17. joed

    84-87 Header Panel (and other parts) delivered to NATS

    I have one in very nice shape, regal. $200 (i'll have to get some pics) Can add headlights, hood ornament and trim, chrome is driver condition add $50. Regal Grill $150 Second one is GN, couple damaged areas $150 (see pics) Can sell with headlights, I may have marker lights, no bezels add $25...
  18. joed

    TH 400 core BOP housing to Nats

    BOP TH 400 core can supply with converter $150 Deliver to NATS Paypal only Thanks!
  19. joed

    GN T-top plastic trim pieces $135

    Nice shape for adding gauges and save your originals or just need a set. Also comes with most of the screws that hold them. Plus shipping. PayPal only. Thank you!
  20. joed

    Accufab regulator pressure setting stability

    I just checked my FP for the first time in years. AFR was going high. At least 5-6 years maybe more. Anyway I found it at 37 psi down from 43-44. Anyone else see this "drift"? I know it's got a spring in it so it may change over time...? A sign of something? Car running better now I'm going to...
Top