Search results

  1. T

    Used Powermaster F/S - $75

    What you see is what you get, assuming it works but unsure. Came off of an 86 GN that has 53k miles and has been sitting for ~5-10 years. Located in Houston, TX but can ship if need be. Sent from my iPhone using Tapatalk
  2. T

    5-7 gal. of VP M1 methanol for sale

    I've got a 5 gallon pail of M1 that I used to fill up my meth tank once, and another couple gallons in a VP Motorsports jug that I'm looking to get rid of for $25. I'm changing from 93/meth to ethanol so it is of no use to me now. Not looking to ship it so it'd have to be picked up or, if it's...
  3. T

    Stage 1 BRF 2004r Transmission - Fresh rebuild

    This transmission came out of a recently purchased 86 GN, and was originally built at Mike Kurtz' shop back in the day. It's there at his shop (Century Automotive & Transmission) getting freshened up/rebuilt. It's been verified to have a BRF valve body and governor and is rated for ~500whp, or...
  4. T

    RJC 315XTF FMIC, Alky Control Kit w/ Bison Plate & extras, (6) 120lb/hr Injectors & more...

    Selling these items, they were bought new by me and only on my car for about 5000 street miles max and less than 10 hits on the track (mostly 1/8th mile) unless specified otherwise below. The parts are all in Houston, TX. I'd prefer a local buyer to avoid shipping, but have no problem shipping...
  5. T

    Front springs, rear air bags, HKS BOV, WB O2 sensor/gauge, StageRite Transbrake

    Selling these parts, posted price does not include shipping, i'm in Houston, TX and if anyone wanted a local pick up. Might be a far fetch, but i will accept and actually prefer cryptocurrencies as payment. We can discuss that in a PM if anyone is up for it. Nevertheless, here we go: 18" 225lb...
  6. T

    Individual EGT Cylinder Data - 93/Meth

    Finally got my EGT kit squared away, and went to the track yesterday to run my car. The factors I believe are most noteworthy are Bison's Balanced Alky Plate, a 70mm throttle body, a hemco 70mm plenum, and a stock intake port matched to iron 8445 ported heads. This screenshot is at the highest...
  7. T

    10.33 @ 129

    Probably the 7th hit in the car at the track, 2nd of the day. the first hit of the day it spun on the launch and the car darted to the side right after the 60'. everyone in the staging lanes was saying how the track was crap, so i watched a couple cars ahead of me make passes and i made some...
  8. T

    Boosted RPS and Gee M Racing

    These guys have been great to deal with, always answer the phone, and are truly passionate about bringing high quality parts to our small turbo buick world. I would highly recommend both of these companies to any of my buddies looking for quality parts. In this thread, I go into more detail...
  9. T

    3 Bolt Gee M Racing Headers

    I originally sent this as an email to Tyler, the owner of Boosted RPS, with hopes it'd be used as a tool for him to help guide any future customers when deciding to run these headers or not. Since then, I have decided to post it here to help do the same; help anyone decide if these headers are...
  10. T

    XFI Individual EGT Monitoring - Wiring Help Needed

    I'm trying to connect the harness from the black box to where it needs to go. I've got the red wire to IGN source, black to ground, but i'm unsure about the two CAN connections. From the instructions, one connection stay open while the other gets connected. However i don't have any plug on the...
  11. T

    First real time to the track

    in reality this is my second time, however the first time was rushed when i got my car back from getting the rear end built and the car had a lot of things wrong with it, like a converter that wasn't matched to the combo, exhaust leak at the exhaust housing on the turbo, etc... anyways, got the...
  12. T

    70mm throttle body

    I'm in the market for one of these... let me know what's out there. thanks guys Sent from my iPhone using Tapatalk
  13. T

    What are the effects of having an intake flow more than the heads?

    I picked up a BGC intake with slight porting from another member on here a while back, and had planned on keeping it in storage until I changed my combo from ported irons/stock intake to GN1 aluminum heads/BGC intake. However, since I won't be upgrading to aluminum heads for quite some time...
  14. T

    internal HD wastegate actuator sleeve

    mine fell off while I was out and about a while back, must've forgot to tighten that damn jam nut... so I'm looking to get just the sleeve, the threaded part that hooks onto the puck. thanks in advance Sent from my iPhone using Tapatalk
  15. T

    PTC 9.5" Install Questions

    I'm installing a 9.5" PTC right now, after reading the instructions I have a few questions. I do know the holes in the fly wheel must be opened up a little bit. Am I supposed to thread the bolt through the flywheel into the converter, use loctite, and achieve the 1/8" to 3/16" recommended gap...
  16. T

    Tuning the VE table safely

    Finally got my car ready to test out, and I've got a base tune from Cal. One of the first obvious things I'm seeing on my 93/alky combo is the need to get the VE table more accurate, i believe my first pass in the car it was rich the entire time (O2 Corr. around -10%). I messed with some of the...
  17. T

    Where can I get a 12V source from inside the car?

    I'm wiring up my electric transbrake from extreme automatics, and it says to apply 12v to activate the brake. On the fuse panel I don't see a port for 12v, I do see a port for the battery though. But my battery is at 13v-14v. Would I be okay just using the port titled battery? I couldn't imagine...
  18. T

    School me on oil catch cans

    I'm planning on getting an oil catch can for the valve covers only. I've got aftermarket valve covers. I was looking into getting push in adapters that'll have either a -10 or -12 AN fitting on the exterior. I've read about people venting their cans back into the MAF or throttle body, what...
  19. T

    Rear wheels still spin while in drive with foot brake depressed

    I recently had some work done on my car by Madman Racing, I had new axles, posi unit, wheels studs, and a few other misc. items installed. When I picked up the car from him, I took it to the track the next day. Per his instructions, I broke in the new posi unit. I heard a screeching noise on the...
  20. T

    IGN 3 supplies power, but not IGN 1?

    So I had 3 connections into 3 different terminals labeled IGN 1. My alky kit, scan master g, and the ignition source to the relay for my second fuel pump. the car has been ran and all 3 were working fine. Today, I went on a drive and the scan master g's display went out. at the time I thought it...
Top