Search results

Oh guess I should have said it’s for a 87

Buckeye AZ. West of Phoenix.

I’m looking for a stock cross over and downpipe. Preferably with minimal dents. Really only need a stock downpipe for now as my turbo is stock but if someone has a aftermarket one affordably priced I’d consider it. Let me know what you have. And it would be shipped to Phoenix unless local.

Well they did put ecotec 2.0 turbos in Saturn skys and Pontiac solstice GXP so rear wheel drive 6 speeds do exist. Are you talking about putting a 2.0 rear wheel drive into what chassis? A GN? Or making a 2012 regal RWD.

Pm sent about the fuel rail

I second that. He’s good shit. Item was just as described. Fast shipping and gave tracking number without even asking. Top notch.

Thanks guys for the info. I figured since I knew the flow data might as well use it. Earl one is on order also.

That’s the plane dank turn up the boost and feed her a steady diet of corn and fords. I thought maybe I was overthinking it, but being a aircraft mechanic I do that often.

I recently bought a used set of injectors 80lb deka’s that had been cleaned and flow checked. All 6 are pretty close within 1-2% of eachother. Should I even worry about what orientation I install them? Should I put the leanest in the front or am I worrying about something that I shouldn’t worry...

Do you happen to know brand of cross over? Is it still in two pieces or has it been welded together?

I removed my oil pan and let sit overnight and then cleaned block with razor blade and brake clean. Then replace with cometic gasket, with just a light skin coat of the right stuff. No leaks yet. Idk if there are better ways out there but there is quite a bit of discussion in the past here...

I’ll txt ya about the pods

What kinda shape are the gauge pods in? Will ya sell without the gauges?

Pm sent about crossover

No it’s all good. I think a crossover and DP can wait when something like this is about to happen to you guys. Best of luck to y’all. Hope everyone stays safe

Some rapscallions decided to steal my cross over and downpipe. So I’m looking for a factory cross over for stock headers. Also need a stock down pipe. I suppose I’d entertain a reasonable prices aftermarket downpipe for stock headers. Let me know what ya have.

Looking for a set of low mileage (don’t need to be cleaned) 80lb Siemens/mototron injectors. Let me know if you have some.

Is the SD2 still for sale?

I thought I remembered there was a responsible threshold for high impedance injectors and the ones im looking at are high impedance. Thank you guys for answering my questions. I just didn’t want to get some injectors to find out they were not compatible.

Yea I need to get the info from him. I know they are something he had on a import and he said they were 560cc. So that is 53.3lbs. So basically he burns it to match the poundage of the injector not so much what make or PN of the injector. I just didn’t know if he went of PN for tables he already...