Search results

  1. T

    86 87 turbo t wheels

    Terry Richards Decatur il. I have 8 turbo t wheels for sale. 6 15x7 and 2 15x81/2 my number is 217 855 4251.can take to gs nationals.
  2. T

    TPS keeps failing

    Clean the 5 volt reference wire at the Ecm a paper clip will release it. Wrong voltage in wrong voltage out.
  3. T

    85 mm ls truck maf gen2 setting

    The only thing I should have to change in the translator is the first page in configuration witch is maf input. Ls1 aluminum has a 13.5 to 14 F air at idle but bucks under any load. Ls2 to Ls6 85mm has 17 F air at idle and bucks under any load. I wouldn't think I should have to add 30 or40% to...
  4. T

    85 mm ls truck maf gen2 setting

    Have been using 4 inch mega maf for last 10 years but had to use tornado in front of turbo to stop maf back flow that caused erratic idle and dying when letting off gas quick. Bought 85 mm truck maf Delphi 10043! Set gen2 maf in to ls1/ls6 85mm starts and runs fine at idle and low speed but...
  5. T

    Bob Bailey 2 step and type 2 ignition

    Thanks Paul. I'll switch back
  6. T

    Bob Bailey 2 step and type 2 ignition

    Installed Bob Bailey 2 step 2 years ago was working fine. Changed over to type 2 ignition last summer! Went to use 2 step at set rpm it kills ignition. Will 2 step not work with type 2 ignition?
  7. T

    87 T type stolen Mohomet il at Hatcher's cars

    My friend Dennis Hatcher has a car lot.He has had a white T type for 6 years,It was stolen sometime in the last 10 days,Dark red interior,ta49,power stroke front mount,In need of paint job,Maf after turbo.
  8. T

    Erratic Idle

    Had same proublem,It was the c14 tps 5 volt reference wire was corroded Popped wire out with paper clip(black plastic hole next to c14 pin) rock steady now
  9. T

    High unsteady idle

    Ben chaseing high unsteady intermittent idle proublem for two years or better,would reset iac and tps,replaced iac tried different tps played with idle fuel with gen2 also had intermittent dieing proublem when coasting thought it was a dfco proublem after switching to Ptc 9.5 converter tried...
  10. T

    Anyone Try This Turbo Surge Fix

    I was getting what l would call Maf back flow with a zo6 cartridge type Maf at low speed throttle open and let off like doing a burnout car would die.Installed Tornado in front of turbo 5 years ago solved problem.Diden't seem to hurt power, ran 10.63 at 128 with .10 off 60 ft at BG 2015 on 23 lbs
  11. T

    No Fuel pump or Injector pulse

    That run off same fuse, check fuse
  12. T

    Vacume Leak Under Dash

    Apply 8 to 10 lbs of air to h vac supply line on firewall,go under dash and listen and feel for air leak
  13. T

    Installed pic converter picked up mph lost in 60ft due to loss of traction,6.79 at 102.77 10.63...

    Installed pic converter picked up mph lost in 60ft due to loss of traction,6.79 at 102.77 10.63 at 127.98 1.56 60 ft
  14. T

    New pb 10.63 at 127.98

    I let it shift auto out of low at 5000 manually shift to 3rd at 5700 ,my gen2 chip has rev limit at 6000 need to have taken off I can't shift out of low fast enough without hitting rev limiter. Converter swap changed shift points from 5400 to 4400 and 5700 to 4700, Shiming tv limit raised shift...
  15. T

    109 block .030 with wiseco pistons

    Interested in short block, I live in Decatur il adout 180 miles from Jdpolzin I belive he lives around davenport,if your picking up Jdpolzins motor I could meet you there Terry Richards cell 217 855 4251
  16. T

    New pb 10.63 at 127.98

    Went to gs nationals had not ran 1/4 mile before this, only 1/8 6.95 at 97 with 1.48 60 last oct. fri I was blowing tires on starting line so sat.i left with less boost and went 1.56 60ft 4.38 330 6.791 1/8 at 102.50 10.63 at 127.98 has 6776 bb turbo home ported irons,home ported intake trw...
  17. T

    New 9.5 nl ptc 18 blade

    Just drove car today with new converter,Normal driving much tighter third gear pull feels like a stick car,from a stop before converter change car would move 40 feet with no boost before tires would break loose now it s instant boost with no foot breaking . Gain about a 100 rpm at 70 mph over...
  18. T

    86 gn ported irons ported intake,comp roller,60 inj,1.48 60 f 6.95 1/8

    86 gn ported irons ported intake,comp roller,60 inj,1.48 60 f 6.95 1/8
  19. T

    New Turbo-T owner in mid-IL

    Hi Terry Richards in Decatur il have 86 gn cell 217 855 4251
Top