Search results

Looking for any of the power seat track covers only for the 87 model, especially the feet covers if you have any please PM with what you have, thanks here is a picture of the feet covers Sent from my iPad using Tapatalk

Pictures to come shortly. I have 2 original bumpers for sale both are ATR, Front and rear, not sure these were ever even mounted, they will need to be sanded painted and touched up, from getting moved around over the years, bought them years ago, and have been stored, these are originals...

Looking for a good aftermarket set of rear lower control arms with the provisions for the stock or ATR sway bar, preferably hr parts and stuff but will consider others metro, etc. Let me know what you got Thanks Sent from my iPhone using Tapatalk

Maybe someone can help me out in this issue I have, my motor & heads ha e been machined and engine builder that did the work said I need a .60 thick cometic gasket, my bore size is .30 over I have searched and searched but can only find a cometic gasket that is 3.860 and .60 thick, and that have...

I have for sale a pair of the 86-87 lightweight regal t-type bumper support inserts, both front and rear in good condition, been stored in my attic for years, will sell both 325.00 shipped to the lower 48 states, no Hawaii or Puerto Rico , pictures coming shortly Sent from my iPhone using...

I have for sale a 86-87 ECU from intercooled GN this was working when removed, Been stored on shelf for awhile in garage, this already has been modified for a power logger so if you have one great, if not then no worries won't be an issue, this comes with the limp mode chip, but no regular chip...

I have 2 setups a silver accel DFI with harness for Gn, and I also have a black box SFI accel DFI with harness and both have data cable as well, looking to trade for a good working classic fast system , or fast XFI , with wideband correction, and harness for my 87 gn(I also have 2 old school...

I have a set of first generation real ATR headers, a little beat up nothing major, been kicking around since the early 90's way before Chinese imitations came around, they have had a couple repairs, as you can see I sandblasted one a few years ago and it still looks pretty good, this set come...

Looking for the 2 transmission line brackets for the turbo v6 GN One is attached at the oil pan, the other is back above the starter attached at the transmission blots I believe, if you have these please post a picture here, thanks Sent from my iPhone using Tapatalk

Looking for the 2 transmission line brackets for the turbo v6 GN One is attached at the oil pan, the other is back above the starter attached at the transmission blots I believe, if you have these please post a picture here, thanks Please delete posted in wrong area thanks Sent from my...

looking for the plastic thing that holds the positive cable wire along the front of the oil pan so it can route up to the alternator,let me know if you have one and can post a picture here, thanks or pm me

I have for sale a set of the old school, very hard to find of valve covers, I bought these with the intention of using them but decided to go a different direction, these come as is, no extra hardware is included... 175.00 Includes shipping in the lower 48 states, and only PayPal as friends or...

I have for sale all the frame parts to make a hybrid swap of a 3.8 sfi turbo intercooled into a (86-91) mazda rx7 FC s4 or s5 model. pictures to come soon. this includes the K-member( same design used in the famous MISRED hybrid that was done many years ago,this was built by him as well) it will...

I have for sale all the frame parts to make a hybrid swap of a 3.8 sfi turbo intercooled into a (86-91) mazda rx7 FC s4 or s5 model. pictures to come soon. this includes the K-member( same design used in the famous MISRED hybrid that was done many years ago,this was built by him as well) it...

it is time to part with my rx7 hybrid project, keeping motor and trans, but the car will come with a custom 3" exhaust, the car did run and drive before I decided to sell and was extremely fast in this light body, but it still needed more to get it finished minor stuff, thats why I decided to...

I'm testing the waters with my 1988 RX7 FC GXL hybrid It is a stock GN drivetrain, with a custom 3" exhaust, the car runs and drives, but still needs more to get it finished, it has factory gauges hooked up and working, a custom fabricated harness, that I built from a factory Gn harness, done...

looking for the flange that holds the hooker 2 1/2" downpipe to the factory elbow, it is oval shaped on the outside circle on the inside with 2 holes, flat, and about 1/4"-5/16" thick approx let me know if you have something thanks

I have acquired these systems never used them but they look to be in good working order, it's a sequential DFI setup and a bank to bank/batch fire DFI setup, don't know much about them except that these have the plug and play wiring harness, and I have only one communication cable but it works...

I am selling a used but in excellent condition kenwood CD player with USB interface, remote, iPod controls,3 rca preout, etc. original box included , only thing needed is the mounting sleeve/ cage which is readily available on ebay for less than 15.00 shipped,selling for 60.00 shipped PayPal as...

if someone can help me I'm in need of some help wiring up the compressor from the buick to the trigger wire from the RX7 using the buick harness and relay for the a/c, I thing the light blue wire coming from the relay is the trigger wire for the buick that is what is given 12 volts to start the...