Search results

I forgot to add, I am using Turbolink. Just seemed odd for the O2 to be constantly moving from one end of the spectrum to the other.

Hello, Whether idling, accelerating, cruising or deccelerating the O2 mv are always bouncing from the red to green to yellow and back again in a fairly rapid manner. My mixture is always bouncing from lean to rich and back again rather frequently as well. This doesn't seem right to me...

Okay, I am new to the ohm testing thing.... Here is what I think one is supposed to do: Disconnect battery. Unplug sensor. Red to each individual outlet on the plug and black to the frame (bare metal) and should get a high reading. Does this sound correct? What reading should I...

Ah, maybe this will work...

Okay, so I can't figure out how to insert a photo.............. Or an attachment........

Hi again, Well as some of you know, I am having ecm driver issues (the one that controls the ALDL, fan and TC lock up). I was doin' some ohm checks and visual checks and came across this (see attached): As you can see, there is a big crack in it. I was wondering what exacty it is and where...

Thanks for the input. The tranny has indeed been in & out of the car. This is the second ECM to burn out this same driver, I just thought it was fluke the first time.... I'll test the pinouts.

Hi, It appears that the driver within my ECM that controls the fan, tranny and ALDL keeps failing. In other words, the fan doesn't work right, the tranny shifts a bit funny and I can't plug in my lap top. I had a Scanmaster hooked up at one point. I have a short somewhere.... The ECM is...

Web Page The link doesn't seem to be working.

Hello, I am having trouble with my ECM not communicating with my Scanmaster 2.1 or my Turbolink. I emailed Ken Mosher and one of his suggestions was to plug in another ECM to see if that will work. It would help to narrow down what might be causing the problem. I could take my ECM out and...

Anyone? I think my poor car is tired of sitting in the garage with the dog.... :(

Hi, I have a Scanmaster which stopped working a while back. It does have power but once the '2.1' goes off, the screen is blank, no readings. I also have Turbolink and after following the directions and hooking up I get a message that it is not communicating with the ECM. On the computer...

Hello, I had a very strange thing happen to my T-Regal today. It was running just fine and then with NO warning the check engine light came on and the idle immediatley jumped up (running about 2K)and lots of fuel coming out of the exhaust. Also, if I shift into overdrive at low speed the...

Hello all, I did a quick search in the forums but didn't come up with any suppliers. I need a flexplate and my local GM dealer says they are discontinued. I don't want to buy some aftermarket junk so does anyone have reccommendations? Thanks, Jeff

Stories? Well, I came here for stories but only found one, the first post. What happened? :D

Hiya, I am on a seriously tight budget. I am working with a couple of people on here regarding my choices but in the interim; Does anywone have experience with tranny's from either company? I am specifically referring to TCI's Street Fighter and either Bowtie's level II or level III...