Search results

Since I bolted a bigger engine to my 6776 S cover with a Precision .63 turbine housing,my spool up is very fast resulting in zero traction in first gear. If I could find an H cover and a .85 A/R turbine housing, would it be a simple bolt on? While it probably would have been a bad idea with my...

I've been searching for theses clips that the factory used on the lower front shock mounting points and I thought I should share what I found. I found their twin brothers with SAE 5/16 threads,but I wanted the metric version GM # 15658213. The first thing I found was that the metric versions are...

I live in Michigan and I've been trying to get my hands on some of this stuff for four days. Of course,I wanted it four days ago. I quickly got the impression that there wasn't a can to be had in the USA. Competition Components was offered as a possible supplier and is 35 minutes away from...

I'd like to get some feedback from anyone using these springs with fast ramps. Successful or unsuccessful.

Based on what I've read,I suspected this would happen. Now I get to fill my engine and exhaust with fuel. The car ran strong and perfectly before the install. It's a unit from the first batch Bob made so I tried to update before starting and was unsuccessful.It farts in the exhaust so I moved...

9.3 to 1 compression ratio This thing makes so much power with so little effort. 12 lbs of boost leaving with 5 lbs at 3,000 rpm. Dave Husek's 3521 torque converter principals applied to my Vigilante 5 disc

How do I get the power wire to the outside of the trans. All of the terminals of the case connector are being used.

Has anyone ever replaced this dust boot?

There is a new source for upper and lower low friction ball joints with .5" longer studs. Summit house brand has them listed as circle track joints. They're not offered as an option for g bodies in a search so you will have to type in the part numbers in their search function. Upper =...

Will this spring be enough with this cam and the stock rockers. I'm shooting for 1.72 installed height. Given the 1.67 stock rocker ratio,I don't dare go any shorter than this as this rocker will open the valves .556". It will be .061" away from coil bind.

I received these about a week ago. They look very strong. Another option for the 4.1.

New in box. 3.830" bore 27 cc dish .927" pin 1.327" comp height 3.625" stroke 6.350" rod Depending on head gasket and combustion chamber volume,compression ratio can be anywhere from 8 or 9 to 1 and higher. If you want to finish the reciprocating assembly,Dave has some pretty good crank and...

Does anyone have a Powerlogger installed on a turbo Buick with a stock chip?

Just received my stroker crank and Molnar Rods From Dave Huseck at Turbo Buick Performance.com. Man,these items are pretty. Dave has a wealth of knowledge and good relationships with a lot of the people who produce the parts that allow us do do what we do with these little motors and...

Looking for the printing on the back side of the bearing. Mine have 001os. I wonder if a set of 6-7120CH-10 would show 010os.

Stock replacement. Hung on bushed stock rods. Pin in center of piston. $350.00.

With the X inside.

Anyone know what these are? 250R160A. Above this is 0600.

Any help would be appreciated.