Search results

  1. T

    TurboLink v2. 13

    I know we're talking 30 yr old scan tech here amd a long shot, but figured I'd see if anyone is still using it and have had the issue I describe. I receive random malfunction codes that show in one frame then gone in the next frame. I also notice some erroneous readings, for example road speed...
  2. T

    Front and rear seat belts

    Looking to buy front and rear seatbelts together or separate for 1987 Grand National.
  3. T

    Grand National Spoiler End Pieces

    Anyone know of a vendor that will just sell the spoiler pieces that sit on the quarter panel extensions? Fiber glass is fine. If any member is selling these pieces I am also interested. -Don
  4. T

    Grand National Spoiler End Pieces

    Anyone know of a vendor that will just sell the spoiler pieces that sit on the quarter panel extensions? Fiber glass is fine. If any member is selling these pieces I am also interested. -Don
  5. T

    Cam and Spring/Lifters for Sale

    comp cams #69005 Cam Card: intake exhaust Valve adjustment hyd hyd gross valve lift .506 .506 duration at .006 tappet lift 274 286 valve timing open close at .050 int 3 btdc 47 abdc exh 50 bbdc 6 atdc cam installed at 112 intake centerline intake exhaust duration .050 230 236 lobe...
  6. T

    No Start Resolved (Ignition Module)

    I don't actually need help with this one as it has been resolved (using vortex buicks no start guide), I'm just putting it out there for future no start help. I recently got ready to start my 87 GN after a year of sitting: Changed oil, fuel, spark plugs, etc... Ignition on Fuel pressure...
  7. T

    1BADTT great seller

    Bought Calpak, received in exact condition as purchased.
  8. T

    Cam Springs lifters

    comp cams #69005 Cam $50 - 100 miles on it (too big for set up) intake exhaust Valve adjustment hyd hyd gross valve lift .506 .506 duration at .006 tappet lift 274 286 valve timing open close at .050 int 3 btdc 47 abdc exh 50 bbdc 6 atdc cam installed at 112 intake centerline intake...
  9. T

    WTB Calpack

    Looking for 86/87 calpack for stock ECM GM PN 16036503
  10. T

    Accel Gen 7 DFI

    Accel DFI Gen 7 Barely used. Have to sell, moving!! Includes: 77046 ECU Wiring Harness for Buick Grand National 3Bar Map sensor Pro Key Calmap software (can update via web) PC cable (serial port) $850 plus shipping Can run off a Standard O2 or Wideband
  11. T

    Cranking and Fuel but no go

    I have been previously having issues with my rpm jumping around while accelerating, cruising and decelerating. I changed coilpack/ module, re-set cam sensor. After doing that still no luck. I finally decided to pull up pipe off and found a very minimal amount of oil in TB with a strong fuel...
  12. T

    How big with stock ecm

    how big, injector and turbo is being ran with stock ecm with low impediance mod? reason i ask is because i do not have time to monkey around with my gen 7. the car runs good with gen 7 and has alot of potential, but is way to time right now. my combination is listed in my signature. i am...
  13. T

    RPM Jumping and Backfire

    I have been having issues with my rpms jumping around while driving and it is not the gauge becasue I can feel the motor give out. It feels like a cylinder missing but worse because the car will stall occasionaly now. It got to the point where the car would stall at 10 to 15 mph sporadically. I...
  14. T

    Coolant color

    I am running low on coolant, but I'm not 100% on which type is in the car. I am almost certain I rember saying to my friend who help build the motor to put the red coolant in. However, the coolant has a green tint to it making me think that it is the standard green antifreeze. I don't want to...
  15. T

    loud grinding noise

    Its been about 1.5 weeks since I last ran my GN. I went out today to start it and I had a little trouble getting it started because of cold weather and not running it in awhile. After a few stalls I try again and hear a loud screaching noise and motor won't turn over. I am thinking the starter...
  16. T

    Best Paint Gun

    If anyone can give me some insight on what to look for when buying an Automotive paint gun I would appreciate it. I noticed that some are gravity fed and some aren't. Is their any pro's or cons between the two. Also what type of pressure should the gun operate at because I noticed some are...
  17. T

    GN Interior paint substitute

    Are there any alternatives for the paint used on the grey interior of the GN rather than buying postons interior paint. $15 plus shipping for a 12oz can of paint is pretty expensive. There's got to be another brand that is the same color at one of the local autoparts stores or even homedepot...
  18. T

    Can't Beat the Leak

    Alright so I originally had a small leak coming from the front of the transmisssion pan. I pulled the pan off and got a new fiber gasket and a different pan that was perfectly flat. I installed the pan and gasket and I still have a slight leak coming from the front of the pan. The transmission...
  19. T

    What O2 Sensor

    What O2 sensor are you guys running with your Gen 7 when not running the wideband?
  20. T

    Transmission Leak

    I have a 2 year old BRF 2004R built by Eric Schertz. Since I've had the transmission there has been a slow leak from the pan that would come and go. Now it is always leaking. It's not a huge amount, but enough to want to fix. After I drive the car around and leave sit overnight there is about a...
Top