Search results

Jay's GN has them,jaysgn.com.

Can anybody tell me the casting numbers for TTA heads?

He has a non turbo car, it will run with the pcm disconected. You can only disable the ignition or the module in the distributor.

I run 22# with stock intercooler and alky inj.. Pulls like a bastard!

Master mechanic during the day :cool: Buick mechanic during the night :cool: I maintain four TR's , one 97 Regal GS and one 04 Z 06 Corvette.

sorry wrong thread :mad:

22 psi street and strip withalky, its very addictive ;)

22 street and strip with alky, its very addicting ;)

Check to see if any ground wires are off. A missing ground in the wires for lights do crazy things. It happened to me on a camaro I had just bought, hit the brakes and the parking lights lit up. The guy before me replaced the headlight switch, he never reconected the ground strap for the...

A clogged fuel filter will cause no power on hard acceleration, but it will go if you let off the throttle.

Anybody?

I need opinions from guys who use AN fittings on a external oil cooler setup. Should I use -8 AN size or -10 AN size. I'm not shure if -8 AN is big enough, I have this size now, I already had it, or if I should buy -10AN fittings.

My car runs 12.5s easily at 108 mph with dr tires. I have a stock turbo, intercooler, injectors and use a late 90's street lethal chip with 20#s of boost. I run 112 octane race gas. My car is apart right now, installing alky so I don't have to use expensive fuel. Put the alky kit on and turn...

It could be a headlight switch or a bad ground from the gauge lights. Usually if something goes out when you turn on the lights its due to a bad ground. Good luck

I run both with 20# of boost with no problems.

The previous owner repainted the car what was left of the emblems were in the trunk. The turbo t are on the fenders the rest are beyond repair. I didn't know it was ricey to take emblems off for stealth. Putting Type R emblems on a base civic is rice.

Its not just the black buicks you have to watch out for, I have a gray one with no emblems:D

Where did you hook the gage + lead. If you have it connected to an accesory on the fuse block that is normal and OK.

Check out Caspers, he can fix your tach and boost gage. You only need to send him the module section that is on the gage cluster.

The engine should shut off if opened, it does'nt take much. Youmight have blocked passages in the intake.