Search results

I have a 86 GN with a standard dash. I bought a digital dash that the person thinks came out of a 85 t type. What do I have to do to swap them?

I had to cut the left rear frame section out of my 86 GN due to rust. I'm welding in a donor section and I need to replace the cushions. I ordered the #6 & #7 rubber cushions from GM a month ago and there still not in. So due I use the poly bushing kit from ENERGYSUSPENSIONPARTS.COM for...

Does anyone have the part # for the body mount cushion's that's used on the GNX only? It's the one at the hump for the rear axle.

I have to replace the left rear frame rail section due to rust. I was going to patch the rail but I noticed that the body mount is gone and so is the cushion. I'm going to cut the rail out and weld in a donor section and while I have this out I want to replace the cushions. Who has good cushions?

I have a ATR 3" SS exhaust with the straight pipe in the muffler. The welds on the pipe inside the muffler broke loose and most of the material is gone. I was wondering if anyone knows of anything I can use to put back in there and then I'll have the pipe retacked in place. Is motorcycle muffler...

I scanned my 86 GN with a friends scanner and my spark advance program read 36 degrees, my IAC IS 60, my knock retard is 36, and my o2 is jumping between .20-.86. I put a new IAC before I did the scan. Some of these readings don't seem correct any ideas.

Does the 3 wire o2 sensor work in place of the single wire o2 sensor without changing anything and what is the advantage of having the 3 wire sensor?

Can anyone tell me the difference between the two?

Does anyone need the clips for the mldg. that holds the front of the headliner in place?

My 86 GN has the wood grain shifter plate cover and the trim around the insrument cluster and radio bezel are the gray-black. Is this correct?

I'm looking for a nice RR wheel opening mldg ,black for a 86 GN.

I've been reading some of the threads on where to hook up my tester to set my rpm's. I have a 86 GN and I don't see a wire behind the alt. or by the a/c accum. am I missing it?

I have a 86 GN thats getting air bubbles in the one half of the master cylinder reservoir. It is the power master brake system and I did have to replace a couple of brake lines that blew out. I bled the system and made sure the rear brakes are adjusted. The brake light is still coming on when I...

This is my first turbo so I need all the help I can get. I was reving up the engine and watching the boost gauge and very little was showing. So looking at the turbo from the front of car to the right of the turbo shield I can see some vanes through a small gap, I tried to spin the vanes with a...

I need to know to find out what the production codes mean and also how to decode the vin.Can any one help me car fax, I tried several times and it wouldn't let me past the vin. Thanks Bob