Transducers and FASTXFI

1NASTYGN

Active Member

Joined

Oct 7, 2009

• Feb 4, 2016

• #1

Can I connect this to my FASTXFI and monitor using my Edash? Can I use a similar to monitor my oil pressure?

Holley 554-102 Fuel Pressure Transducer

 

turbobitt

Well-Known Member

Joined

Feb 14, 2002

• Feb 4, 2016

• #2

With the output voltage 0.5 to 4.5 it will work.
As a guess, I would expect the gain to be 25 (4 volt range and 25psi/volt) and the offset to be -12.5(since 0 psi=0.5 volts and not 0 volts).
AG.

 

Last edited: Feb 4, 2016

T

Toby_Goodmk

Test Fit officianto

Joined

Dec 9, 2011

• Feb 4, 2016

• #3

I have been using this guys transducers for a couple years now. Before I was using the 5 volt for the power logger, never a hiccup. Now I am using their 12v sensors for the Fast, The sensor is right on par with my analog gauges and for 18$ ea, why not.

http://www.ebay.com/itm/Pressure-tr...ash=item3f3b3fd1e8:g:oQsAAOSwxN5WU8Cs&vxp=mtr

 

Chuck Leeper

Toxic old bastard

Staff member

Joined

May 28, 2001

• Feb 5, 2016

• #4

Toby_Goodmk said:

The sensor is right on par with my analog gauges and for 18$ ea, why not.

Click to expand...

Yep....

 

1NASTYGN

Active Member

Joined

Oct 7, 2009

• Feb 5, 2016

• #5

Thank You!

 

Wes

Member

Joined

Mar 25, 2002

• Feb 5, 2016

• #6

Make sure you order the 12v units. They are not $18 tho.
http://www.ebay.com/itm/Pressure-tr...ash=item3f4d5c8d78:g:cq8AAOSwNSxVY0aE&vxp=mtr

 

T

Toby_Goodmk

Test Fit officianto

Joined

Dec 9, 2011

• Feb 5, 2016

• #7

yes, correct 32.00 for the ceramic type, my first ones were 18 because of 5v

 

W

WHTTRSH

Sleeper

Joined

May 1, 2011

• Oct 20, 2016

• #8

Toby_Goodmk said:

I have been using this guys transducers for a couple years now. Before I was using the 5 volt for the power logger, never a hiccup. Now I am using their 12v sensors for the Fast, The sensor is right on par with my analog gauges and for 18$ ea, why not.

http://www.ebay.com/itm/Pressure-tr...ash=item3f3b3fd1e8:g:oQsAAOSwxN5WU8Cs&vxp=mtr

Click to expand...

Just got a power logger and SD2 chip(cheap mans standalone lol) will I be able to use these to monitor fuel and oil w the power logger? Will 12V sensors work or does it need to be 5V for the power logger?

 

B

bison

Moderator

Staff member

TurboBuick.Com Supporter!

Joined

Dec 19, 2005

• Oct 20, 2016

• #9

WHTTRSH said:

Just got a power logger and SD2 chip(cheap mans standalone lol) will I be able to use these to monitor fuel and oil w the power logger? Will 12V sensors work or does it need to be 5V for the power logger?

Click to expand...

IIRC you need 5v sensors. I have them 12v and 5v and 0-100psig or 0-200psig SSI p51's. Also have absolute sensors for MAP. 1 bar, 2 bar, 3.5 bar, and 5 bar. No Chinese crap. These sensors will read accurately and I have yet to see one fail.


Sent from my iPhone using Tapatalk

 

T

turbo96max

Member

Joined

Jun 6, 2007

• Nov 28, 2016

• #10

bison said:

IIRC you need 5v sensors. I have them 12v and 5v and 0-100psig or 0-200psig SSI p51's. Also have absolute sensors for MAP. 1 bar, 2 bar, 3.5 bar, and 5 bar. No Chinese crap. These sensors will read accurately and I have yet to see one fail.

Sent from my iPhone using Tapatalk

Click to expand...

How are the ssi compared to the Holley or Zetronix 3.5 map?? They seem about 40-50 bucks less expensive than aem.
Are they different at all do you know?


http://www.jegs.com/i/Holley/510/55...wxstTXAyFuuiNsTMDwryA_-s9CU9B6PpAKhoCCt7w_wcB