Power Steering Pump - Aluminum Pump from Another GM Car?

I spoke with Lee about a week ago. The lighter 670 box is not readily available anymore. Turn One still lists a 5lb lighter steering box on their website.

Scott W @ GNS just mentioned that he has access to some 600 series steering boxes for $760? Not sure from where though.
 
novaderrik said:
every LT1 used the same pump- so get one for a 92-96 Vette, a 93-97 F body, or 94-96 B body..
but i don't see what the benefit would be, since they are probably the same pump as a GN..
Click to expand...
So just so I understand correctly all the vehicles above use aluminum power steering pumps that will bolt on to our motor
 
Don't think those have an aluminum housing. All are cast iron. Are you in need of a pump?
All that's left are Cardone remans. You can send your pump to Lee Steering in CA for a rebuild.

Jones and Turn One can sell you a new aluminum pump but they need a few parts out of your original. These parts are no longer made and allow the pump to work counterclockwise.

I've dealt with Lee and Turn One, both are great companies to do business with. Lee rebuilt a pump with AN fittings for $150.
Turn One built a new aluminum bodied pump with AN fittings for $350. Both dyno the pumps before they leave.
 
turboclam said:
Don't think those have an aluminum housing. All are cast iron. Are you in need of a pump?
All that's left are Cardone remans. You can send your pump to Lee Steering in CA for a rebuild.

Jones and Turn One can sell you a new aluminum pump but they need a few parts out of your original. These parts are no longer made and allow the pump to work counterclockwise.

I've dealt with Lee and Turn One, both are great companies to do business with. Lee rebuilt a pump with AN fittings for $150.
Turn One built a new aluminum bodied pump with AN fittings for $350. Both dyno the pumps before they leave.
Click to expand...
Ok got it.. Thanks
 
I'm still not clear. If I hit the wrecking yard or other sources a pump off one of the cars on the list will rotate in the correct rotation for our car?
 
image.png
As long as it's a type II style GM pump with a smooth pulley. Smooth pulley without the ribs usually indicates a counterclockwise turn.


The Corvette (above pic) style may or may not work. Tube might have to be modified.
 


I dont think mine has a tube like that. Is that for the return to the reservoir?



But now that I look at this pic maybe it does have that tube on it. But then I look again and that is the steering box. I might just need my eyes checked. haha
 
A stock TR pump won't have the long tube just the Corvette pumps. It is a low pressure so you can use a hose clamp.
 
Which part is confusing?

Doubt your going to find a correct pump in a salvage yard. Cardone rebuilds from AutoZone are like $60 with a core with a warranty.
 
Can we get a part #. I'm going to get one to put on the shelf.
 
You must log in or register to reply here.

Similar threads

I
10 second powertrain part out
3 4 5
Replies
88
Views
8K
imjoesnuffy
I
H
GM G-Body Performance Upgrades - New Book by Joe Hinds - Fact Checking
Replies
6
Views
1K
Hot Air
H
turbobuick
Moroso Vacuum pump Meziere water pump accessory drive setup
Replies
5
Views
438
sackracing
sackracing
U
Feeler: 1983 Regal Limited Base 3.8 Rust-Free Project Car (in GA)
Replies
0
Views
324
USC87
U
Taylor04
Power Steering Pumps....
Replies
11
Views
2K
regal81455
R
Top