TIMINATOR's latest activity
-
TIMINATOR replied to the thread Rebuild time.Phoenix,AZ. I have been asking the street/strip guys lately about their E 85 experiences because I'm building a 512" nasty motored 1972... -
TIMINATOR replied to the thread Rebuild time.E85, mebbie in other parts of the country, but here in Phoenix,AZ. you need a flex fuel sensor equipped operating system, as reported by...
-
Another leftwing cesspool declining to shithole status..... Screw those assholes. They voted for those idiots, so live with their choices.
-
TIMINATOR replied to the thread Need help identifying camshaft.I have been modifying go kart/ minibike motors since I was 11 or so, and cams have always fascinated me. I re ground my first minibike...
-
TIMINATOR replied to the thread Need help identifying camshaft.Call Comp cams and get a catalogue! LOTS of good info! Read all of the tech info in the front, there's lots of it! Some shops will...
-
TIMINATOR replied to the thread Need help identifying camshaft.Have you run it yet? Smooth idle and lots of vacuum if you have a vacuum brake conversion. I have run the 212/212 and custom 213/215 hi...
-
TIMINATOR replied to the thread Need help identifying camshaft.It is an older Comp 260 Hydraulic flat tappet cam. I hope you numbered the lifters and put them back on the same lobes. Whenever I...
-
TIMINATOR replied to the thread 1986 1987 T-Type wanted.1987, Turbo T Limited. 74 options on SPID, Recent paint, new idynamite, headliner, carpet/dynamat, rebuilt front suspension and brakes...
-
-
TIMINATOR replied to the thread Intercooler Cleaning.As a side note, the ultrasonic also cleans the outer fins that get a lot of road dirt and dead bugs that reduce cooling effectiveness...
-
TIMINATOR replied to the thread Intercooler Cleaning.If you aren't going to clean the IC correctly (ultrasonic), keep in mind that you have to purchase the cleaner, that entails $$$ and...
-
TIMINATOR replied to the thread Intercooler Cleaning.Many general and automotive machineshops have large ultrasonics. Mine had a 55 gallon tank, i did the final cleanup on blocks, heads...
-
TIMINATOR replied to the thread Intercooler Cleaning.I put them in an ultrasonic cleaner. Cleans the inside and outside very well. TIMINATOR
-
TIMINATOR replied to the thread Leaking pinion.Clean the splines on the pinion and yoke, then apply a small bead of rightstuff to seal the spline to the yoke at the inside end of the...
-
TIMINATOR replied to the thread Which PCV Valve?.Elegant solution to a non existent problem in my experience. I have 4 used and 2 new stamped ones here that seal just fine. Moral of the...
-
TIMINATOR replied to the thread Which PCV Valve?.As I said, the valve seals by gravity and the weight of the "puck." They must be verticle! They don't seal sideways either! And not as...
