Yep, return line restricted. Not able to flow enough. You say your front cover was damaged from the accident - the fuel lines that run along the front of the engine were probably bent or pinched.
The rubber durometer used by door seal manufacturers sucks. I came across a product from Germany called Gummi Pflege Stift a few years ago and I feel like it made a difference on my door seals. I applied it over and over to saturate the seals. It comes in a small bottle with a sponge applicator.
Mike didn't manufacture the bearings. Vendors just sell parts, they don't inspect everything that goes out the door. Just buy another set and return those. This is how it works.
Your attitude often determines how helpful the vendor is. I'll jump through hoops for my customers if they're...
Cool video.
Just emptied mine yesterday. Mishimoto can. Second time with new engine. Had about 2 oz of oil in it from 200 miles of driving. Also contained a bit of water. This is with the factory pcv and stock type valley intake gasket. Seems high to me. This engine pulls 21 inches of vacuum at...
Just installed a set of seat belt guides from a 4th gen Camaro convertible. Most do the 3rd gen guide but I think this one is better. Fastener spacing is the same. It lowers the path of the belt over your shoulder even more than the 3rd gen guide. I'm 5'10" and the belt path is perfect. If...
Hi Andrew, do you have experience using MagaLogViewer with Powerlogger files? I'm stuck uploading the current tune. Powerlogger logs can be downloaded in csv format that MegaLogViewer can read, but the table generator also needs your current tune. The tune isn't in a format that MegaLogViewer...
Steel hood. No, never bent the hood but it felt like it could when closing it. The supports had too much pressure. Closing took too much force. Right length but like I said, designed for another application. I ditched them and bought a set from Rock Auto.
Yes, I had a set a few years ago that practically bent the hood into a taco. They never loosened up. They weren't specific to the car. I've also seen different supports for fiberglass and steel hoods advertised for our cars.