Recent content by ek02

  1. ek02

    4.1 Stroker Build

    Fed Ex delivered my hydraulic roller cam today. It was a long wait, but they finally got some cam blanks in.
  2. ek02

    4.1 Stroker Build

    I just got my Johnson short travel roller lifters from Full Throttle. Still no cam from Comp.
  3. ek02

    Oil left in pan?

    RJC makes a deep sump pan with the oil drain hole flush with the bottom of the pan. Holds more oil too.
  4. ek02

    4.1 Stroker Build

    So far so good. Both my engines have girdles on them. The vacuum is good on a 274" 4.1. I also have a vacuum tank so the brakes work fine. When I had a 3.8 in the truck, vacuum was not too good, so I added the vacuum tank.
  5. ek02

    4.1 Stroker Build

    It's a Comp custom roller grind. I run NA with Nitrous. I have the same cam in my 4.1 now. It's .526 lift with 1.65 rockers on a 108 LSA with 228 intake and 230 exhaust @.050 lift. Same cam as an old Kenne-Bell Mk II R cam. Pulls hard in the mid range on a 4.1.
  6. ek02

    4.1 Stroker Build

    I just ordered a set of short travel roller lifters from Full Throttle. All I need now is a cam from Comp.
  7. ek02

    Johnson Hydraulic Roller lifters

    Thanks for the adjustment specs.
  8. ek02

    Johnson Hydraulic Roller lifters

    Thanks. I didn’t see them. I’ll change my order tomorrow.
  9. ek02

    Johnson Hydraulic Roller lifters

    I just ordered a set of Johnson Race Lifters from Full Throttle. Maybe they will not be as noisy as my Comp885's. I wanted the short travel lifters, but the race lifters were the only ones listed.
  10. ek02

    Johnson Hydraulic Roller lifters

    That's what was in the Comp catalog back when they made the 885's.
  11. ek02

    Johnson Hydraulic Roller lifters

    It appears that neither type is available yet. I'm waiting for the short travel rollers to become available. I am running Comp 885 short travel lifters right now. The short travel lifters seem to be a lot noisier than any other type. I run mine at zero lash as recommended by Comp.
  12. ek02

    GN1 Roller Rockers

    No problems with the Scorpion rockers, just the crappy studs Champion sent me. One broke a long way from home. I went with ARP studs and it has been fine ever since.
  13. ek02

    4.1 Stroker Build

    I picked up my short block today. It all came out perfect. Some photos of the finished product are attached. Balancing was expensive with two plugs of Mallory metal.
  14. ek02

    ROLLER CAMS ARE COMING BACK

    I e mailed my contact from Comp. He said they are still working on orders from 2021. I ordered my custom grind on July 7th, 2022. It's going to be a long wait.
  15. ek02

    4.1 Stroker Build

    The short block is ready to go. I'll have to wait until I get back in town to pick it up. The invoice is really reasonable for all that machine work and assembly. The only charge I don't know yet is for balancing to 50%. Has to be a slug of heavy metal to get it right.
Top