1989 LN3 3800 fwd block,stock rods,stock pistons(150000km never been out the block),stock crank,222@0.050 roller cam ,ls7 roller lifters,heads ported larger stainless valves 5 angle seats,145Lb springs with dampers,yella terra adjustable roller rockers,log manifold,holset h1e 4" inlet 3" outlet,60lb seimens maxed out 100% duty cycle,stock intank pump feeding 1.5L surge tank to TREperformance 255L/hr pump,stock reg,300x450x76 ebay front mount,all 3 inch cooler pipes hot and cold side,mikes transmissions usa beast turbo 350 with very loose hughs convertor 3.45:1 BW78 diff 28 spline axles with minispool,26x10 hoosier quicktime pros.last dyno run years ago with holset H1E 58mm 450rwhp with injectors at 80-85% 19psi enough to run 10.80's@128mph 0psi launch off the brakes, no alky.
New pb 10.33@130.9mph 19psi
-
10
Your messages have been liked 25 times.
-
2
Somebody out there liked one of your messages. Keep posting like that for more!
-
10
You've posted 100 messages. I hope this took you more than a day!
-
5
30 messages posted. You must like it here!
-
1
Post a message somewhere on the site to receive this.