Radiator Air Box-in Kit

scot w.

GNSperformance.com
Joined
Feb 19, 2005
This kit replaces those flimsy wore out factory rubber shroud around the radiator jsut behind the grill. This was designed to divert 100% of the air that travels through the grill to be forced to go through the radiator!! The results: Better / Faster Cooling! Our kit is made from 1/16" Aluminum that comes factory coated in Gloss black with a protective film on each side to prevent scratches during installation. Remove the protective film to reveal the glossy finish. An Anti-Rattle strip has already been Pre-installed to insure quietness. (Very minor notching required if using an external cooler, very easy to do with some snips).

Mounting: This kit mounts right behind your grill to the ( X ) brace that is mounted to your core support. Simply remove the two 10mm bolts from One side, leaving the cross brace there, mount the correct side of the box-in kit right over the cross brace and bolt it back up. Do the same to the other side now just remove the two bolts holding on the two corners of your air dams (under the center of your car screw the bottom section on, Bolt your air dams back on and your done!


NOTE: For Turbo Regals this kit is best suited for use with ALL Stock Location Intercoolers. (This kit can be used with front mounts but some minor notching is required!)

No drilling required! The holes have already been pre-drilled and ready to install.

Kit comes complete with all mounting hardware and instructions.


Kit Includes:

Bottom & Both sides of the air box.
6 sheet metal screws.
4 Push clips (pre-installed)
Complete instructions


Price: $107.00
Visit our Link here to purchase -----> http://www.gnsperformance.com/bodyframe-g-body

Scot W.
 
Last edited:
you have any pictures of it installed?
Will shortly! I'm installing one on a customers car Tuesday or Wendsday and will take some pic's of it installed then I will post them up for everyone to see.


Scot W.
 
I forgot to mention that these are also cut out professionally Then I drill all the holes and install the anti-rattle strip and clips.

Special order colors Available upon request only!

Matte Black
Brushed aluminum
Cleared bare aluminum
Silver

*Basic kits come in Gloss Black



Scot W.
 
More pictures ( Installed)

I had another install today and here are some more pictures of the kit installed.


NOTE: The last picture with the white rag on the grill is from AFTER the kit was installed!! Before it wouldn't even hold the rag against the grill.... AND THIS IS WITH A SINGLE STOCK FAN!!!! :eek: :biggrin:

It deffinetly pulls more air through the grill with it installed... :)


Scot W.
 
nice install

didnt take long,car runs 10 degrees cooler,going home,noticed a slight increase in oil pressure,maybe 5 lbs at idle probably,from cooler coolent temps, thanks scott,
 
Looks really nice, any pics of one installed in a car with a front mounted intercooler? :cool:
 
Looks really nice, any pics of one installed in a car with a front mounted intercooler? :cool:
I had one on my personal car and with the grill in you can not take a picture! ;) Plus with the FMIC in you can't see anything. You must use your imagination jedi...:)




Scot W.
 
I had one on my personal car and with the grill in you can not take a picture! ;) Plus with the FMIC in you can't see anything. You must use your imagination jedi...:)




Scot W.

You said little trimming was required to use it with a FMIC. I know the bottom has to be for the pipes to pass through, but other than that, where else? Thanx.
 
You said little trimming was required to use it with a FMIC. I know the bottom has to be for the pipes to pass through, but other than that, where else? Thanx.
Thats it! Unless you have external coolers then you just have to notch out a spot for the lines..


Piece of cake! When done it will hold rags against the grill :biggrin:





Scot W.
 
Queston!

Hey Scot, what do I need to do different when I order if I want one of the matte black ones?? How much longer would it take to ship??
Thanks,
John A, Turbohh
 
Hey Scot, what do I need to do different when I order if I want one of the matte black ones?? How much longer would it take to ship??
Thanks,
John A, Turbohh
Hi John,

You would order it normally but add in the Notes or Messages ( Matte Black )

I may take a day or two difference thats all.



Scot W.
 
Placed an order, but...

Scot, I just placed an order, but didn't see an opportunity for notes or message to specify color. It's the one shipping to San Ramon, CA. It's not life or death, but I'd prefer the matte black if you could intercept my order. BTW, my taillights are still going strong!!
Sincerely,
John A, Turbohh
 
Scot, I just placed an order, but didn't see an opportunity for notes or message to specify color. It's the one shipping to San Ramon, CA. It's not life or death, but I'd prefer the matte black if you could intercept my order. BTW, my taillights are still going strong!!
Sincerely,
John A, Turbohh
I recived your order John,

Give me a coule days and I will have it made up for ya. When it ships I will contact you via PM and let you know it's on the way.


Thanks John,


Scot W.
 
I'll try it!

I've got the nose off installing an aftermarket parallel-flow condenser anyway, so I'll give 'er a shot! I need all the help I can get cooling this beast in the FL heat, and the rubber thingies are shot anyway. I'm going on now to place my order! Thanks!
 
Top