Conservative tune 1/8mi

[Chevota]

New toyota 1/8mi vid.
http://videos.streetfire.net/video/f...4b00f40bb2.htm

[86brick]

Very nice Scott, especially for the low boost/conservative tune... 6.22 @111mph in the 1/8 on a Buick would probably be a 9.80-70 in the 1/4 at about 136-137mph!

Mind giving us some details on the combo and if I remember correctly your truck is around 3000lbs, correct??

[Quiky One]

Wow Great pass!

Jason

[SLOWSIXER]

I Was There And It Was Sweet I Think You Let Off On One Of The Passes ?

[Chevota]

Originally Posted by 86brick

Very nice Scott, especially for the low boost/conservative tune... 6.22 @111mph in the 1/8 on a Buick would probably be a 9.80-70 in the 1/4 at about 136-137mph!

Mind giving us some details on the combo and if I remember correctly your truck is around 3000lbs, correct??

Thanx! - Combo is 235ci, 70gtq, powerstroke IC, PG trans, stock toyota rearend, 2900lbs.

-scott wile

[86brick]

Originally Posted by Chevota

Thanx! - Combo is 235ci, 70gtq, powerstroke IC, PG trans, stock toyota rearend, 2900lbs.

-scott wile

Nice! My brother's Buick powered Mustang hybrid aka Butang is also using a Glide and he eventually will probably be using the 70GTQ turbo... Mind me asking how much stall in the converter and also what size gears??

[Chevota]

Originally Posted by 86brick

Nice! My brother's Buick powered Mustang hybrid aka Butang is also using a Glide and he eventually will probably be using the 70GTQ turbo... Mind me asking how much stall in the converter and also what size gears??

3.42's and 3400 stall (could prob go less)

[86brick]

Thanks

[blackshoebox]

Originally Posted by Chevota

Thanx! - Combo is 235ci, 70gtq, powerstroke IC, PG trans, stock toyota rearend, 2900lbs.

-scott wile

Cam specs? Steel or Aluminum heads? Stand alone fuel management? Tire height?

[Chevota]

Originally Posted by blackshoebox

Cam specs? Steel or Aluminum heads? Stand alone fuel management? Tire height?

Roller cam, GN1's, XFI, 28in tire

[blackshoebox]

Originally Posted by Chevota

Roller cam, GN1's, XFI, 28in tire

Now we are talking. Brick is talking about my butang. Currently it has:

Steel heads(stock ported and stock size valves), flat tappet cam, FAST(b2b), and an old skool atr 66 ptrim. Has went 6.7@104 @ 23 psi/22#. PG Trans-4000 stall(loooosssseee) with 3.55 final gear. 275-60-15 MT drag radial.

Just sizing up combo's for comparison sake. Post the #'s when you turn it up, also how much rpms u will be turning at the top on a 1/4 pass. That is why I wanted the spec's on the cam. I am currently out of steam around the 800-900 foot mark.

Looking to change some stuff around soon..