|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
August 3rd, 2003, 09:26 PM
|
|||
|
|||
|
help with part#
I tried 3 different pontiac dealers and stumped all parts service guys.
Does anyone know the part# of the small bracket and bushing that clamps on to the other larger half of the forward traction bar support/mount..located next to the transmission? Or the part # of the whole assembly that clamps onto the forward part of the traction bar that extends all the way to the rear axle? I finally broke this part on too many 1.60 60ft times...     
|
|
August 3rd, 2003, 09:40 PM
|
||||
|
||||
|
You should be able to go to the dealer's parts dept in person and get what you want (I don't have a clue about the part number you described).
They have these expanded pictures of the different systems on CD-ROM. One of them will show the part you need. After you identify the part on his computer screen, he can put a number on it, probably  I don't mean to sound condescending with this post, it really works at my pontiac/buick dealer. They work hard to please.
|
|
August 5th, 2003, 01:34 PM
|
||||
|
||||
|
Maybe thats called a torque arm support bracket and mount?
__________________
89 TTA Stock appearing  10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999
|
|
August 5th, 2003, 11:19 PM
|
||||
|
||||
|
i thought that part was offered 2 ways
LIPS IN AND LIPS OUT i think the TTA is opposite the regular 89 GTA and is like the early 82 f-body?? have you found one yet?
__________________
BRYAN Eric Marshalls Turbo Tweak Chips Timeslips for white car TA61/009 Inj Under hood shot of white limited   Proud TTA owner
|
|
August 7th, 2003, 06:53 AM
|
|||
|
|||
|
that hasnt been available for years.. we did try to adapt a reg one an couldnt... completely different
__________________
Dan don't run your mouth if you cant run your car  86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com
|
|
August 16th, 2003, 11:48 AM
|
|||
|
|||
|
The bracket (originally riveted) was discontinued in 1996. The bushing is available from Energy Suspension Co. in urethane only.Thier part number is 3.1111G, and comes with the proper "poly lube". You will have to re-use your stamped metal bracket. Hope this helps. Turbota.
P.S. I got mine from Summit, or Jeg's, can't remember which one but they both carry them. Last edited by turbota : August 17th, 2003 at 11:22 AM.
|
|
August 16th, 2003, 12:55 PM
|
|||
|
|||
|
thank you all for the replys...
tta/gn people are just great on this board....
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
