|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
July 21st, 2008, 01:26 AM
|
|||
|
|||
|
atS TOO HOT
while driving around for say 15-20 min and then idling the car in park or at a stop light the atS says TOO HOT on the scan master. THen car then shuts off on its own. everything else seems to be within normal limits, once I start driving again everything is good as the atS numbers go down. I am assuming this in bc the car is moving and the air is cooler. But it is not even that hot out??? I could see if the outside air temp is really really hot, but it isn't really.
Any one else have this problem?? THanks, Jarred.     
|
|
July 21st, 2008, 07:39 AM
|
||||
|
||||
|
When underhood temps hit over 140 I believe.. the scanmaster flashes HOT.
But this shouldnt affect anything. If it shuts off.. then talk with your chip maker.
__________________
89 TTA Stock appearing  10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999
|
|
July 21st, 2008, 10:32 AM
|
|||
|
|||
|
ya I think I will talk to the chip maker. When the car shuts off I just turn it back on if I have to keep driving and car seems to run fine. I was just wondering what was going on here. Thanks, Jarred.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
