|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
June 22nd, 2008, 02:41 PM
|
|||
|
|||
|
Does this look BUTCHEROUS?
I ran the strap from the eye bolt to the sub frame bracket. I am very impressed with the way the car feels at idle and under boost. The motor mounts were replaced last year and since then I have only put a few hundered miles on them. I know they where done right but one is already slightly sagging. The strap fixed all the minor jiggles and is so much quieter! When shifting in gear, the car is silent and much more firm. Everything seems much more secure and tight.
I put a twist tie around the racket for extra insurance. Do you think it looks alright? How is the angle? Look like something that will last a long time? Thanks, Joe     
|
|
June 22nd, 2008, 02:54 PM
|
||||
|
||||
|
Straps never look right on these cars IMO. Get the engine anchor. I ran both strap and anchor and the anchor performs like the strap and looks a lot better.
Ratchet in an engine compartment looks hill-jack to me...Sorry.
__________________
89 TTA with built 109 .040 over J&E pistons,K1 rods,billet steel caps,steel crank,224/224 flat tappet comp cam,HV front cover,port matched intake,fully ported TTA heads,PT70 turbo,KM sheet metal intake,50# injectors,billet fuel rails,TT chip,NX nitrous wet shot system,3'' THDP,SM2,Razors alky injection,vigilante 3200 stall,fully built tranny,drag bags,convo pro wheels,15x9x30 Hoosier slicks in back with 15x3.5x28 skinnies up front. 6pt cage for now. Coming soon to a strip near YOU!  
|
|
June 22nd, 2008, 03:39 PM
|
||||
|
||||
|
Yeah - do yourself a favor and get a H&R d/s engine mount
__________________
Owner of Royal-T [1987 Turbo T Limited] destined to run in the low 11's [in street trim] and be featured in a national publication •BEST so far 12.1x @ 112.9X• BEST MPH 114 ALL on 18" Toyo street tires - ZERO boost launch and full tank of PUMP gas - stock "109" block, stock heads, and lots of good stuff ALL MIXED WITH A LIL' ALKY 
|
|
June 22nd, 2008, 03:58 PM
|
|||
|
|||
Hi,
That won't cut it, sorry to say.A simple cable or one of the vendor's straps will be much better.
__________________
***83 Buick Regal TType*** '87 drivetrain and all associated stuff. Fresh rebuild with Stock block,ARP studs installed with stock caps,align bored to ensure proper fit.Sealed Power forged pistons,stock rods,resized for ARP bolts,stock heads with low cost stainless valves,206/206 Comp flat tappet cam, TA49 turbo,009 injectors,hotwired Walbro 340, Hooker cat back exhaust,K&N filter in stock airbox,Spearco water injection, pretty stock otherwise. ***89 Pontiac Turbo TA*** Walbro 340, Flowmaster muffler, otherwise stock. ***96 Buick Riviera*** 3.6" blower pulley,otherwise stock.Runs 15s on a hot day at 4000 plus pounds weight, with the A/C on. ***84 Jeep Cherokee 2door 4x4*** 87 Turbo Regal motor,thm700R4,rusty wild child,definitely a restoration awaiting progress.
|
|
June 22nd, 2008, 04:45 PM
|
||||
|
||||
|
This is what the anchor looks like.
__________________
89 TTA with built 109 .040 over J&E pistons,K1 rods,billet steel caps,steel crank,224/224 flat tappet comp cam,HV front cover,port matched intake,fully ported TTA heads,PT70 turbo,KM sheet metal intake,50# injectors,billet fuel rails,TT chip,NX nitrous wet shot system,3'' THDP,SM2,Razors alky injection,vigilante 3200 stall,fully built tranny,drag bags,convo pro wheels,15x9x30 Hoosier slicks in back with 15x3.5x28 skinnies up front. 6pt cage for now. Coming soon to a strip near YOU!
|
|
June 22nd, 2008, 05:25 PM
|
|||
|
|||
|
Quote:
__________________
87 GN: .30 TRW, GN1 heads, Comp. austempered 210 roller, steel center 2 caps/ ARP studs, T&D rockers, HR poly motor mounts, ATR headers/ d-pipe and exhaust pipes with Ultraflos, Tial 38mm wastegate, Turbosmart b/ controller, real Art Carr trans/ 3500 n/l conv, Dynotech aluminum d/shaft with loop, Hotchkis lower arms, air bags, ATR bar, Moser axles, girdled cover, SMC alky, TE-62, 65mm t/b, Precision doghouse and stock mount I/C, Holmes radiator, ACM PCV oil can, PTE oil filter re-locator, dual fans with harness, all braces, scanmaster....still not done yet 
|
|
June 22nd, 2008, 05:28 PM
|
||||
|
||||
|
Just my opinion of course, but staps and anchors look like ass no matter how they are installed. As already wisely stated, get a HnR drivers poly mount and save yourself some broken parts. One of the local guys had the eye bolt break. The alternator lip and air conditioning hose at the end were screwed. Also cracked his main accessory bracket.
__________________
Stupidity has a certain charm, ignorance does not. Frank Zappa Check out my White 87 Type T: http://community.webshots.com/user/wldwst Some examples of my right brain activity. http://robertwestcustomdesign.blogspot.com/
|
|
June 22nd, 2008, 05:41 PM
|
|||
|
|||
|
Quote:
__________________
My Buick... http://s139.photobucket.com/albums/q295/jcawley3/Buick/ 120K stock block, stock intercooler, 4" big mouth CAI, 60lbs inj TT Alky chip to match, 340 walbro hotwired, translater, 3.5 MAF, SMC alky, 3" DP with cut out, GT6162 BB Turbo, Red Stripe converter  , powerlogger, RJC powerplate and boost controller, ATR exhaust no cat
|
|
June 22nd, 2008, 06:20 PM
|
||||
|
||||
|
Here's one I made. It's just some 1/4" bar stock that I fabbed up into 2 pieces and drilled to fit over the 2 strut tower bolts use a 3/8 eye bolt and a turnbuckle. BUT I had been chasing some false-transitional knock and I always suspected this tie down. Sure enough I fabbed up another mount and made a real short ratchet strap out of two in order to replace the turnbuckle set up.
It eliminated allot if not most of my false knock problems, save for the 1-2 shift etc. .. 
__________________
'89 TTA #473 w/31K+ miles. TE44, Razor's Alky.Cat back,dump tube,3200 9" art carr and shift kit.#50's with a TT chip,206/212 cam,RJC plate.Tubular rear arms and panhard bar, subframe connectors and strut tower brace. A dog that chases his tail, will be busy.
|
|
June 22nd, 2008, 06:25 PM
|
|||
|
|||
|
Quote:
Agree. I was thinking about the anchor and the have read about the cable as well. I took the ratchet apart. Placed a heavy duty bolt in between the 2 holes on the ratchet (hooking to eyebolt) and used loctite on the bolt. I cut the strap. Now I just had about 3 feet of strap and the S hook. Then I hooked the S hook to the sub frame bracket. I fed the strap into the ratchet a tightened. Just thought I would add a little more detail to the my original post. Joe
|
|
June 22nd, 2008, 06:32 PM
|
||||
|
||||
|
HOLY COW!!!! Did Demo put that on for you??
 Just kidding. Joe buy the poly mount from H&R and I'll put in for you for a nomonal fee. Phil
__________________
86 T-TYPE 11.78 16lbs. boost 93 octane still haven't used the Alky!! Thanks to Jack Cotton !!!! Still tuning. Sold the WH1 Here comes the tens!! 70 GS455 480 horse no turbo!! www.sicksixracing.com
|
|
June 22nd, 2008, 06:41 PM
|
|||
|
|||
|
Quote:
 I am looking the tickets to the Raiders & Bills game right now.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
