Go Back   TurboBuick.Com > Tech Arena > Turbo Trans Am Tech
Reload this Page Engine mount bolts install front to rear or other way around?
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 22nd, 2008, 06:01 AM
Senior Member
  
Join Date: Nov 2001
Location: United Kingdom
Trader Rating: (0)
Posts: 1,484
Engine mount bolts install front to rear or other way around?
Do I install the long engine mount bolts from the front meaning the nut is close to the firewall or do I install them the other way around meaning nut is facing the radiator? And do both sides (driver and passanger) install the same?

Been two years now and I can't remember :-)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old June 22nd, 2008, 02:21 PM
Member
  
Join Date: Mar 2008
Trader Rating: (0)
Posts: 36
Jan,
If you don't get an answer by tomorrow, I'll go out into the garage and take a peek at mine.
Bob
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old June 23rd, 2008, 01:07 AM
Senior Member
  
Join Date: Nov 2001
Location: United Kingdom
Trader Rating: (0)
Posts: 1,484
Thanks Bob, that would be great. I take it your engine never been out the car right?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old June 23rd, 2008, 07:32 AM
Razor's Avatar
Forum tech Advisor
  
Join Date: Jul 2001
Location: Tampa,Fl
Trader Rating: (5)
Posts: 9,003
From the rear going forward, Meaning nuts on front. This is the easiest way.
__________________
89 TTA Stock appearing
10.550 at 132.22 1.539 60ft 3850 race weight w/driver
Always on 93 octane
www.alkycontrol.com
727-570-9999
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old June 23rd, 2008, 12:42 PM
Senior Member
  
Join Date: Nov 2001
Location: United Kingdom
Trader Rating: (0)
Posts: 1,484
Quote:
Originally Posted by Razor View Post
From the rear going forward, Meaning nuts on front. This is the easiest way.
Looking in the service manual they show front to rear, so nuts towards the firewall ....
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old June 23rd, 2008, 01:18 PM
Senior Member
  
Join Date: Jul 2003
Location: Toronto
Trader Rating: (2)
Posts: 1,193
Quote:
Originally Posted by Jan Larsson View Post
Looking in the service manual they show front to rear, so nuts towards the firewall ....

If you have a manual why did you ask?

PS: Use some Locktite!
__________________
87 LTD owned since May 88 No hood ornament from the factory!
Old combo went 11.80 with 1.75 60 ft & broken crank gear teeth with 95* weather on a TA-49!
New combo is roller & 6776 Turbo. Track times coming!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old June 23rd, 2008, 02:34 PM
Senior Member
  
Join Date: Nov 2001
Location: United Kingdom
Trader Rating: (0)
Posts: 1,484
Quote:
Originally Posted by Just a Six?? View Post
If you have a manual why did you ask?
The manual only shows a simple diagram and does not mention anywhere to install the bolts either way so thought I ask to see how they were actually installed from the factory ....
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old June 26th, 2008, 08:35 AM
Member
  
Join Date: Mar 2008
Trader Rating: (0)
Posts: 36
Jan,
Just checked mine...sorry it took longer. Mine are just like in the manual....Nut on the firewall side, bolt inserted front to back.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I install a PTE Front Mount Intercooler Buick_noob Turbo's and turbo related parts 4 March 21st, 2008 12:26 PM
Front mount install ? grocerygetter General Turbo Buick Tech 3 December 21st, 2006 10:10 AM
intercooler talk.....front mount, rear mount, stock! wiredhomes Turbo's and turbo related parts 21 January 7th, 2006 03:17 AM
Front mount install. Turbo1dr HYBRIDS 3 July 11th, 2005 09:18 PM
Bolts to mount engine to engine stand thomas_quinn Hot Air (non-intercooled) Tech 3 May 19th, 2003 10:51 PM


All times are GMT -5. The time now is 02:59 AM.

Powered by vBulletin Version 3.6.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0
One of the largest message boards on the web !

Contact Us - TurboBuick.Com - Archive - Top