|
Main fuel line size ?
Anybody know what size tubbing the main fuel line is (the hard line from the pump)...I'm guessing it's 3/8" but when measured it comes up a little shy ? The reason I ask is because I need to replace a section and the 3/8 compression fitting I used is not sealing up...the ferrule seemed to be a little loose. Hope it's not a metric line
Thanks,
Scott
__________________
Scott89TTA
1989 TTA #1376
48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16.
P&P heads and cam next Winter if all goes well
|