![]() |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
||||
|
What knowbody knows the answer
Just want to know if I can safely run the car with the stock TTA fuel pump for a while until I can get the Walbro fuel pump and hot wire kit installed using the TurboTweak chip for my mods and not have them all mods installed (walbro & alky) ? Thanks, Scott
__________________
Scott89TTA 1989 TTA #1376 48K with a couple mods; GT6776e, Alky Control, Scanmaster 2, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. Installing now: QBoost manual in car boost controller. LT1 MAF & Translator on order ! P&P heads and cam next Winter if all goes well
|
|
||||
|
I dont see a problem unless your pump is bad.
Racing and driving are two different spectrums. You dont need a lot of fuel to drive a car. Race it.. you bet.
__________________
89 TTA Stock appearing 10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999 |
|
|||
|
Don't see why not. Car will be pig rich at WOT with low boost setting, but you're NOT going to run it WOT!!?? Right!!??
Should baby around just fine....
__________________
Brian MacKinnon Guntersville, AL 86 T-Type, mostly stock |
|
||||
|
No not racing anytime soon...how about a little spirited street driving ? If I take it to OC for the Spring Cuisin' Ocean City Special Event Productions next weekend it will be stop light to stop light driving and not much over 40-50 mph at the most...just maybe a little burst every now and then but most driving will be creeping along 15-30 mph. The trip there is 150 miles from home...all highway driving 55-65 mph...easy cruising. Good news is there will be a whole mess of MD, PA, NJ turbo Buick guys going so if somthing becomes a problem I should hve some help.
My stock pump is fine...Eric's chip instructions say to set the fuel pressure at 43 psi to start...ok to do with the stock pump ? I may be able to get Razor's kit installed this weekend as well but that is about a 50/50 chance. Also since the turbo has a hi-boost actuator will I be able to set the boost down to ~17 psi or so with the rod and stock boost controller or will I need to install my Q-Boost manual controller to do so? Thanks, Scott
__________________
Scott89TTA 1989 TTA #1376 48K with a couple mods; GT6776e, Alky Control, Scanmaster 2, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. Installing now: QBoost manual in car boost controller. LT1 MAF & Translator on order ! P&P heads and cam next Winter if all goes well
|
|
||||
|
Quote:
![]()
__________________
Scott89TTA 1989 TTA #1376 48K with a couple mods; GT6776e, Alky Control, Scanmaster 2, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. Installing now: QBoost manual in car boost controller. LT1 MAF & Translator on order ! P&P heads and cam next Winter if all goes well
|
|
|||
|
What kind of timing do you have your chip set at? If it is already set for the Alky won't that timing be advanced way to far for spirited driving? I'd hate to see you with detenation issues. Do you have a direct scan or something to adjust the chip? If you pull some timing out before your weekend and then add the timing back in after you install the alky that should work, right?
Be careful. Tearing down a longblock and spending money for new parts sucks.
__________________
89 TTA, 23,000 miles, AEM boost controller, sfc, 8" K&N, PI 3000 stall, Caspers heated 02, 3" SS downpipe & interm pipe, MT ET street drag radials, Precision 50# injectors, Turbo Tweak chip, 12.42 @ 107 with very humid head wind. Coming soon: Precision DBB Billet 6262rs, MAF translator, KYB AGX shocks, 4.1L stroker, RJC girdle, ported stock heads, bigger valves, comp 980 springs, RJC power plate, Dutt neck to stock intercooler, custom 3.5" MAF pipe, etc, etc
|
|
||||
|
Quote:
"pacecarta" on TBS.com sugested this tune until I get the FP and alky installed... "keep the boost #17 or less with 93 octane and drop timing to 19* 1-2 /17* 3-4 with hd wastgegate set arm length to minimum pull to puck arm (1/16th inch) , connect hose direct from turbo compressor to the wastegate actuator , leave qboost off for now till alky is in if its below 17lbs you can add a little by turning arm in (shorter ) but be carefull watch the o2s and knock you shouldnt have to add fuel if only running 17lbs but i would add 15% WOT fuel anyway and if its too rich you can drop it back , better to be a little rich and then tune it to lean." -Scott
__________________
Scott89TTA 1989 TTA #1376 48K with a couple mods; GT6776e, Alky Control, Scanmaster 2, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. Installing now: QBoost manual in car boost controller. LT1 MAF & Translator on order ! P&P heads and cam next Winter if all goes well
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| fuel pump question | buickturbot | Engine Tech | 0 | July 20th, 2007 06:17 PM |
| fuel pump question | 1dollardog | General Turbo Buick Tech | 2 | January 6th, 2007 11:08 PM |
| fuel pump / water pump question | stephen | General Turbo Buick Tech | 5 | April 11th, 2006 10:34 AM |
| Fuel Pump Question & Fuel Rail Part | jshilli1 | General Turbo Buick Tech | 2 | June 16th, 2003 12:52 PM |
| Fuel Pump and H/W question | SpoolinUpGN | General Turbo Buick Tech | 1 | December 30th, 2002 05:53 PM |