|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
November 12th, 2001, 10:33 PM
|
|||
|
|||
|
specs on a tta cross-drilled crankshaft
would like all correct specs and casting numbers for verification
thanks mike      
|
|
November 29th, 2006, 10:31 PM
|
||||
|
||||
|
Quote:
__________________
Bob Hinson 9.57 @ 3720lbs on the foot brake - TSE Winner 2004 and 2007 and runner up 2005 and 2006 Nothing in the world can take the place of persistence This is America and English is the language, legally or not. English, the single greatest empowering tool that immigrants must have to succeed. http://www.us-english.org/inc/
|
|
November 30th, 2006, 06:44 PM
|
||||
|
||||
|
Same as the GN. Only thing is the cross drilled mains. 877 casting.. Perty sure.
The rolled filet cranks are either 229 or 877. The NA cranks also came 229 and 877. HTH
__________________
89 TTA Stock appearing  10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999 http://stores.ebay.com/ALKYCONTROL_W...eNameZl2QQtZkm
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
