|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
April 6th, 2005, 12:28 PM
|
||||
|
||||
After failed emissions....
My TTA failed emission requirements at idle.
After talking with julio, I checked the PCV valve and found a non-AC Delco PCV valve in there  The AC Rochester PCV valve was close, but not original.Replaced AC Rochester valve with an AC Delco PCV valve, and Passed the retest.... (didn't do ANYTHING to the car whatsoever, except waste time looking for a non existant vacuum leak). Hats off to RAZOR and his "Stock parts"crusade  RAZOR: If you'll post something here in this forum about BLM troubleshooting, I'd be more than happy to link it to the TTA FAQ List....Pretty Please  Thanks for your help Julio      
|
|
April 6th, 2005, 10:42 PM
|
||||
|
||||
|
Lee, glad I could help in some way
Too tired to type... If I get the courage.. i'll do what I can.. Now go and start clocking some miles on that thing.. There is a method to my madness 
__________________
89 TTA Stock appearing 10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
