Go Back   TurboBuick.Com > Tech Arena > Turbo's and turbo related parts
Reload this Page 72bb S-trim?
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 3rd, 2008, 10:15 PM
Senior Member
  
Join Date: Nov 2006
Location: LI new york
Trader Rating: (0)
Posts: 539
72bb S-trim?
anyone have feedback on this turbo?
__________________
109 stroker with lot's of new stuff
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old June 4th, 2008, 02:12 PM
boostingbuick's Avatar
Senior Member
  
Join Date: Aug 2002
Location: Jacksonville N.C.
Trader Rating: (1)
Posts: 1,100
The Turbonectis one? I run a Turbonectics one and it spools faster than my 70 q non bb. turbo. I have not put it above 20 psi so I can not tell you that is makes more power. At 18 psi I run the same mph as the old turbo.
__________________
1984 GN Frame off resto. Full wieght with spare tire and jack. All opitions are in working order.

87 Harness and ECM, "484" block 4.1 J&E Pistons, Full floating stock rods, stock crank, Girdle, CHAMPION GNr heads fully ported, T&D shaft mounted, Comp 218-212 roller, 70mm tb, sheet metal upper, 4 inch inlet pipe, Turbonectics 72mm BB q-trim 4 bolt turbo, P.S. intercooler, atr headers, 3.5 dp, custom dual 2.5 stainless exhaust with utralflows

BRF 200r4 built with alto reds, Billet servo, Transgo shift kit, Forward drum, CK's 3600 9 inch nlu, custom pan with rear sump.

GTA fronts with LS1 front brakes and Baer rears. Chrome moly custom upper and lowers with 3.42 gears and moser axles.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old June 4th, 2008, 06:37 PM
Senior Member
  
Join Date: Nov 2006
Location: LI new york
Trader Rating: (0)
Posts: 539
Quote:
Originally Posted by boostingbuick View Post
The Turbonectis one? I run a Turbonectics one and it spools faster than my 70 q non bb. turbo. I have not put it above 20 psi so I can not tell you that is makes more power. At 18 psi I run the same mph as the old turbo.
What boost did you run with the old turbo? What mph?
__________________
109 stroker with lot's of new stuff
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old June 5th, 2008, 07:16 AM
boostingbuick's Avatar
Senior Member
  
Join Date: Aug 2002
Location: Jacksonville N.C.
Trader Rating: (1)
Posts: 1,100
18 lbs on 93 with both and ran 126 with both.
__________________
1984 GN Frame off resto. Full wieght with spare tire and jack. All opitions are in working order.

87 Harness and ECM, "484" block 4.1 J&E Pistons, Full floating stock rods, stock crank, Girdle, CHAMPION GNr heads fully ported, T&D shaft mounted, Comp 218-212 roller, 70mm tb, sheet metal upper, 4 inch inlet pipe, Turbonectics 72mm BB q-trim 4 bolt turbo, P.S. intercooler, atr headers, 3.5 dp, custom dual 2.5 stainless exhaust with utralflows

BRF 200r4 built with alto reds, Billet servo, Transgo shift kit, Forward drum, CK's 3600 9 inch nlu, custom pan with rear sump.

GTA fronts with LS1 front brakes and Baer rears. Chrome moly custom upper and lowers with 3.42 gears and moser axles.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old June 5th, 2008, 08:43 AM
Senior Member
  
Join Date: Jan 2003
Location: Lansing, MI.
Trader Rating: (1)
Posts: 1,230
Quote:
Originally Posted by boostingbuick View Post
18 lbs on 93 with both and ran 126 with both.
Damn that mph is impressive for 18 lbs of boost and 93!


Is that just straight 93 and no alchy?
__________________
V8KillR4U

109 block bored .030, main caps, girdle, T&D roller, roller cam (secret grind), ported champion intake, GN1's, 70 mmTB, Plenum, 75 lb inj, 70-ptrim, atr headers, 3" TH DP, CAS v-1 FM, NickMchale Radiator, Tranny cooler, 400 trans with brake, rev manuel VB, Precision Converter 3400, Max effort, have a FAST ready to install, REds XP pump, voltbooster (probably some more stuff im forgetting)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old June 5th, 2008, 09:07 PM
Senior Member
  
Join Date: Nov 2006
Location: LI new york
Trader Rating: (0)
Posts: 539
lookin for more info
__________________
109 stroker with lot's of new stuff
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old June 6th, 2008, 03:26 PM
Senior Member
  
Join Date: Nov 2006
Location: LI new york
Trader Rating: (0)
Posts: 539
still lookin for info on this turbo! Thanx
__________________
109 stroker with lot's of new stuff
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old June 6th, 2008, 08:56 PM
Senior Member
  
Join Date: Oct 2003
Trader Rating: (1)
Posts: 413
Here are a few pics of my GTK-850 72mm, it has a .85 precision housing with a S-trim exhaust wheel. I'll let you know how it works in a couple weeks
Attached Images
   
__________________
87 GN
Stroked & Girdled, GTK-72BB S-trim .85, Solid roller cam, GN1's, 75#inj, XFI, Cottons FMIC, Alkycontrol, TA Headers, 3.5"DP, Tial WG / BOV, PTLV 200R4, 3400 PTC 9.5" N/L
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old June 14th, 2008, 02:32 PM
JCotton's Avatar
Senior Member
  
Join Date: May 2001
Location: Mass.
Trader Rating: (0)
Posts: 1,022
Quote:
Originally Posted by chasmat2316 View Post
anyone have feedback on this turbo?
Ran one today ten one at onehundred thirtytwo on seventeen lbs with a soft launch. I will post more on a thread on my BB when I get home
__________________
Jack Cotton check out our Bulletin Board today,www.cottonsperformance.com/forums
413-789-0531
Da Pumpkin - 8.90@154
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old June 14th, 2008, 07:35 PM
Member
  
Join Date: Aug 2006
Trader Rating: (0)
Posts: 71
Quote:
Originally Posted by JCotton View Post
Ran one today ten one at onehundred thirtytwo on seventeen lbs with a soft launch. I will post more on a thread on my BB when I get home


Wow at 17 psi, Please do.



Jess
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old June 15th, 2008, 07:59 AM
JCotton's Avatar
Senior Member
  
Join Date: May 2001
Location: Mass.
Trader Rating: (0)
Posts: 1,022
Da Pinks Car first pass.... - COTTONSPERFORMANCE.COM
__________________
Jack Cotton check out our Bulletin Board today,www.cottonsperformance.com/forums
413-789-0531
Da Pumpkin - 8.90@154
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old June 15th, 2008, 02:24 PM
DR BOOST's Avatar
political refugee
  
Join Date: Aug 2001
Location: chicago
Trader Rating: (5)
Posts: 1,343
is a s-trim just the new version of p-trim or is it actually larger than the q?
__________________
86 t-type "Betty" with a few bolt ons, few weld ons, a few JB weld ons and a weldon pump. Stock location heads, intercooler, transmission, convertor, block, computer, rearend, and gastank.

5 TIME PEOPLES CHAMPION

current 2008 PEOPLES CHAMPION elected by a group of peers
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old June 15th, 2008, 02:54 PM
Royal-T-Ltd's Avatar
Senior Member
  
Join Date: Jul 2003
Location: St. Louis, MO
Trader Rating: (0)
Posts: 1,500
i think its larger than the "Q"
__________________
Owner of Royal-T [1987 Turbo T Limited]
destined to run in the low 11's [in street trim] and be featured in a national publication
•BEST so far 12.1x @ 112.9X• BEST MPH 114 ALL on 18" Toyo street tires - ZERO boost launch and full tank of PUMP gas
- stock "109" block, stock heads, and lots of good stuff ALL MIXED WITH A LIL' ALKY
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old June 15th, 2008, 06:04 PM
JCotton's Avatar
Senior Member
  
Join Date: May 2001
Location: Mass.
Trader Rating: (0)
Posts: 1,022
Quote:
Originally Posted by DR BOOST View Post
is a s-trim just the new version of p-trim or is it actually larger than the q?
it basically replaces the Q trim wheel..
__________________
Jack Cotton check out our Bulletin Board today,www.cottonsperformance.com/forums
413-789-0531
Da Pumpkin - 8.90@154
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old June 16th, 2008, 06:25 AM
DR BOOST's Avatar
political refugee
  
Join Date: Aug 2001
Location: chicago
Trader Rating: (5)
Posts: 1,343
ther reason i was asking is because the part number of the exhaust housing on the posted pic of the turbo is for a p-trim(76) wheel. the qtrim part number would be 80.
__________________
86 t-type "Betty" with a few bolt ons, few weld ons, a few JB weld ons and a weldon pump. Stock location heads, intercooler, transmission, convertor, block, computer, rearend, and gastank.

5 TIME PEOPLES CHAMPION

current 2008 PEOPLES CHAMPION elected by a group of peers
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old June 16th, 2008, 07:54 PM
Senior Member
  
Join Date: Oct 2003
Trader Rating: (1)
Posts: 413
The exhaust wheel measures out to 2.694 on the inducer and 3.111 on the exducer or is it the other way around I think the housing was cut to fit the bigger wheel, the new HPQ wheel is almost identical in size.
__________________
87 GN
Stroked & Girdled, GTK-72BB S-trim .85, Solid roller cam, GN1's, 75#inj, XFI, Cottons FMIC, Alkycontrol, TA Headers, 3.5"DP, Tial WG / BOV, PTLV 200R4, 3400 PTC 9.5" N/L
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old June 19th, 2008, 07:14 AM
JCotton's Avatar
Senior Member
  
Join Date: May 2001
Location: Mass.
Trader Rating: (0)
Posts: 1,022
Quote:
Originally Posted by DR BOOST View Post
ther reason i was asking is because the part number of the exhaust housing on the posted pic of the turbo is for a p-trim(76) wheel. the qtrim part number would be 80.
Doc, like ILUVBOOST said...... We use the P trim housing and machine it out to fit the new S-68 wheel.
__________________
Jack Cotton check out our Bulletin Board today,www.cottonsperformance.com/forums
413-789-0531
Da Pumpkin - 8.90@154
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old June 19th, 2008, 08:57 AM
Senior Member
  
Join Date: May 2001
Location: NYC
Trader Rating: (3)
Posts: 6,947
Are all the 70 series exhaust housings the same dimensions in p trims and q trims? just the wheel different?
__________________
87 Stage2 in the works!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old June 19th, 2008, 10:18 AM
JCotton's Avatar
Senior Member
  
Join Date: May 2001
Location: Mass.
Trader Rating: (0)
Posts: 1,022
Quote:
Originally Posted by 49-blues View Post
Are all the 70 series exhaust housings the same dimensions in p trims and q trims? just the wheel different?
externally the same, the internal dimensions for the wheel must be machined to fit the different turbine wheels.
__________________
Jack Cotton check out our Bulletin Board today,www.cottonsperformance.com/forums
413-789-0531
Da Pumpkin - 8.90@154
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
wanted 1/4 glass trim,brf tranny,atr single exhaust,cold air intake and misc trim Tacrum Parts wanted 6