ckperformance 2004r overhaul manual - Page 10

tonka · #**316** (**permalink**) June 9th, 2005, 12:48 AM

What's the delivery time running on the manual, ordered on May 12th and nada so far. Could really use it about now.

olds403 · #**317** (**permalink**) June 9th, 2005, 02:04 PM

Quote:

Originally posted by chris718
many who ordered are not following thru,its disappointing .anyone have any ideas where else to make this available?other forums to post it on?

Chris as a suggestion, put it up on your website with some pics. I almost gave up on seeing this manual. Checked the buick board and there it was ready to be ordered. May want to run a few on Ebay though I would mark it to cover all the ebay fees. Good luck and thanks for the great piece. olds403

tonka · #**318** (**permalink**) June 9th, 2005, 05:01 PM

Manual is here, looks like it was a zip code problem on the address....

chris718 · #**319** (**permalink**) February 8th, 2006, 09:29 PM

ive still got some left

EricB · #**320** (**permalink**) February 9th, 2006, 08:02 PM

Chris let me know if you have any more if you do i'll give you a c.c number over the phone. Is tonight to soon??????????

chris718 · #**321** (**permalink**) February 9th, 2006, 08:13 PM

call in tomorrow.718 784 4256

MBKBJB · #**322** (**permalink**) February 11th, 2006, 11:46 PM

Hi,
If you have any manuals left could I get one? Let me know.
Thanks!

chris718 · #**323** (**permalink**) February 11th, 2006, 11:48 PM

call in on monday or use the paypal on our site.account number is my email address.65.00 shipped

MBKBJB · #**324** (**permalink**) February 11th, 2006, 11:51 PM

Email address --> Trannyman0101@aol.com, right?

Thanks again!

chris718 · #**325** (**permalink**) February 11th, 2006, 11:54 PM

MBKBJB · #**326** (**permalink**) February 12th, 2006, 12:13 AM

Sent 65.00 to your Paypal address. Thanks again!

chris718 · #**327** (**permalink**) July 6th, 2006, 07:11 PM

still got some left

chris718 · #**328** (**permalink**) September 20th, 2006, 08:13 PM

well its been 3 years since the first post.thanks for all of your support.updated version will be out when i run out of copies.i will be releasing a technical supplement with the following info:improved lube oiling mods to the center support,new direct clutch circuitry that eliminates the main causes of direct clutch feed failures,reduced drag in the lo reverse and overdrive clutch packs for improved performance,updated clutch piston sleeves,step bt step rollerizing of components with critical dimensions for the do it yourselfer,pump mods for improved converter clutch apply and release,scomplete guide to billet overdrive section,converter drainback solutions,tv plunger spring length theory and selection for transplants and a few other things.supplement will be very reasonable.ill keep all up to speed.

turbolou · #**329** (**permalink**) September 22nd, 2006, 11:59 PM

Quote:

Originally Posted by chris718

several of the frequent readers of transmission talk have emailed us for info on how to obtain our book and when it will be available.as of today the book is scheduled to be ready in mid december and the first run will be 100 copies.due to the cost involved in printing and labor costs for layouts we must limit the first run to 100 and we will then see the response to it and print the next lot accordingly.all who would like to reserve a copy should email us as to assure you get a copy of the first print.the book will also cover methods for those without certain specialty tools working at home,clutch material selection,installing roller bearings,and also mechanical and hydraulic operation as well as how and what is needed to make them live at various horsepower levels.remember without your support on the first run the second one wont be possible and the reason for the book is for all of you out there.

Chris! definitely put me on the list. I've had with all the experts I can't do any worst than some of the experiences I've had. It's time to try it myself. Lou

chris718 · #**330** (**permalink**) September 23rd, 2006, 09:01 AM

lou i agree with you and based on what ive seen you do already i dont think it is something you couldnt accomplish

turbolou · #**331** (**permalink**) September 23rd, 2006, 09:55 PM

Quote:

Originally Posted by chris718

lou i agree with you and based on what ive seen you do already i dont think it is something you couldnt accomplish

When I first started as a mechnic in my youth. I worked in several trans shops as an installer
back in Buffalo N.Y. At this point in my life I didn't want to start learning how to build transmissions. I have run out of local options & have no choice but to learn at least the 200's I have nothing to lose.

ChrisCairns · #**332** (**permalink**) September 24th, 2006, 10:06 AM

I have your original version .... it's great. The one complaint I have is that the size of the font is very hard to read for we, err, ahh, "eye's worn out from many, many years of use" types. In other words, us old fcukers.

Make the font larger and at least 1,000,000 more people from Florida will buy it.

chris718 · #**333** (**permalink**) September 27th, 2006, 07:07 PM

seems to be renewed interest in the manual again

A. G. Olphart · #**334** (**permalink**) October 1st, 2006, 11:13 AM

Quote:

Originally Posted by chris718

seems to be renewed interest in the manual again

Put me down for a copy of the supplement.

And I second the comment on font size.

at7we2 · #**335** (**permalink**) October 3rd, 2006, 10:02 PM

have a copy of the original. intereted in the supplement.

SVORay · #**336** (**permalink**) October 4th, 2006, 12:40 AM

I wouldn't mind sometime in dept on the 200-4R. I've got a sick one setting here that needs help.