|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
February 25th, 2005, 09:43 AM
|
||||
|
||||
|
Billet Input shaft
Opinions on using a Billet input shaft with the stock OD planet.
Some say dont use it.. Other say its better than the stocker.. other says the metals are different and can cuase damage to the spline area ... I did a search and there is no concise answer... 
__________________
89 TTA Stock appearing  10.550 at 132.22 1.539 60ft 3850 race weight w/driver Always on 93 octane www.alkycontrol.com 727-570-9999 http://stores.ebay.com/ALKYCONTROL_W...eNameZl2QQtZkm     
|
|
February 25th, 2005, 09:12 PM
|
||||
|
||||
|
1 out of 50 will eat away the carrier with our billet shaft,and 1 out of 25 will break the stock shaft at over 450 horsepower.we are currently producing an overdrive carrier that will be released shortly however.
__________________
CRISTOFOROS KOKKONIS GM AUTOMATIC TRANSMISSION SPECIALIST www.ckperformance.com STREET,STRIP AND DRAG RACE TRANSMISSIONS,CONVERTERS,DRUMS ,SHAFTS ETC.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
