Saw this on the LS1 tech forum. That link took me to the Ebag ad. From what the seller says, it appears the turbo will support a LSX w/ some reasonable HP expectations. Wondering: A. It's obviously a Ho Chi Min product?? B. Without access to the map, is it worth looking at? C. If all else fails, considering the price, it might be a good mockup piece? [Don't see any further progress/discussion on the mock up turbos]. D. NE1 have other sites for the low ball turbos? NE1 care to comment?? On 3 Performance 76mm Turbo Mustang 4.6 5.0 5.4 Foxbody P-trim On3 800hp T4 | eBay
That is a mismatch of wheels for just about anything but a low rpm 600hp diesel application. I wouldn't be caught dead running any of the china compressors or turbines. The cost of the inconel in a proper alloy for a high performance turbo will drive the price up quite a bit. Not saying those aren't inconel but I would be testing them to find out. You could buy a cheap pair of small shaft 60-1e's with tang ex housings for about $1300 that will do over 1000whp on 93 with no alky with a proper combo and have the piece if mind they will last.
