NEW! Precision Turbo PW46 External Wastegate.

Dear Valued Customers,

It is with great pleasure that we are proud to announce, the release of our newest product, the PW46 external wastegate. These units feature a 46mm valve, and can be used in a wide variety of applications. They can be used in any kit or setup that currently utilizes a v-band style 44mm gate, (Tial, Turbosmart, etc) but will work best with the supplied inlet flange (the inside diameter of our flange is slightly larger than our competitors). The wastegates will be shipped with all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI). All units feature a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm. In addition, the unit features a five angle valve job, as well as five high temp 17-7 ph springs (more durable and can withstand higher temperatures before changing rate). Lastly, the PW46 is set up for a 1 3/4" pipe on the discharge side, and a 1 7/8" pipe on the inlet.








These units can be ordered under part number PBO085-2000, and will include all 5 springs. Also, they are currently available and ready to ship. For further information on this, or any of our other products, please feel free to give us a call.

Patrick
Precision Turbo
Level 2 Territory Sales Rep
219-996-7832

Waiting for the first down pipe to be made.

wish they had came out earlyer. i would have bought this one instead of my tial gate. it comes with all 5 springs? what pressure are they?

The new PW46 external wastegate, surpasses the flow capabilities of our competitors wastegates.

There are 5 springs that come with each wastegate. Each wastegate will have the 9 psi Green spring already installed.
The 5 springs are:

Small inner "Natural" color = 1.5 psi
Medium outer "Yellow" color = 3 psi
Medium outer "Red" color = 6 psi
Large outer "Green" color = 9 psi
Large outer "Blue" color = 18psi

These springs are specific to the Precision wastegate and are not compatible with other competitors wastegates. Mixing and matching the springs, will yield different spring rate levels, ranging from 1.5 psi, up to 25.5 psi.
This new wastegate is impressive to say the least.
Let us know if we can help.

Patrick

Why did Precision go with banjo bolts for the fittings? Most like to screw their fittings directly into the wastegate; ie AMS sensor. And how would one use those quick push line fittings? Tap the top of the wastegate.

IMHO should've went with a female 1/8NPT.

But I like the clamps.

Billy T.
gnxtc2@aol.com

Darkcyde
Wastegates were just released for sale to the public yesterday.
The Tial 46 has a very specific 4 bolt flange configuration where as our PW46 wastegate uses V-band flange configurations. That F46 looks like it was specifically designed for Turbo Porsche applications, according to their website.

gnxtc2
The thread size for the pressure ports are M10x1.0.

Patrick

I spoke with our engineer about this, this morning. A 1/8" NPT fitting will screw right into the M10x1.0 threads for the banjo bolts. 1mm pitch is 0.0393 thread pitch and 27 threads per inch on an 1/8-27NPT is 0.0370. You should have no problems adapting the many different styles of fittings to our wastegate.
Hope this helps.

Patrick

I've put 1/8"npt fittings into the Tial wastegates without any issues. Should be the same with these.

We'll probably try one of these one the next downpipe someone orders from us. Makes the package a lot more affordable.

That is what I wanted to hear!!!

Order one up and you can be the guinea pig.

Patrick is either on his way to or at PRI, it could take him a little longer to respond.