Need 4 barrel carb for my turbo regal

Discussion in 'Before Black (non-SFI) Tech' started by mattmittenz516, Jan 16, 2012.

  1. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    The later heads seem to be the better ones if you want to change them out. The last 4 numbers of the heads are 8445 and on the ends of the heads where the water passeges are, it's been bridged to help stableize the head to block mating surface.
  2. MNcarbturbo What's Fuel Injection?

    Message Count:
    696
    Offline
    I have '80 heads on mine (dont know the number) and was told by the guy that ported them that the exhaust ports are better then 8445 heads. They dont have the briged cooling ports but I dont know it helps any or not. Ive never seen anyone try both and see if they blow there on non briged ones or what.

    Honestly any 79-87 head would be better.
  3. RUDE DOG Rudeawakening

    Message Count:
    157
    Offline
    I figured id let someone who needs this stuff have it in order to get their car running. I felt the urge last year to throw them in for scrap because its just sitting on the floor of my garage (Literally). check out the pics on my thread called my gn frame. You can see it on the floor. Theres a little interest in some parts. The computer is good as i took it out of a running engine. Its all up for grabs. To make it official who wants this stuff. THANKS Rudy
  4. 1980 Buick Member

    Message Count:
    65
    Offline
    What I have is a 4 Barrel Carburetor for a 78 or 79 3.8 Litre Turbo Regal. Again: If your interested
    I will "uncover" it and give you the #'s on the side. It's 4 Barrels, NON 3-C and will need to rebuilt
    (You know, Float needle / Seat etc ...)

    LET ME KNOW IF THAT IS WHAT YOU WANT.
  5. mattmittenz516 The Reeg

    Message Count:
    74
    Offline
    yes thats what i want
  6. 1980 Buick Member

    Message Count:
    65
    Offline
    I'll look in the AM Sat. I Promise.
  7. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    If you can wait I have a lead on a complete set up with the 4 barrel and all the top end parts except the heads. He contacted me earlier today and just needs to dig the parts out. I'll PM his email to you when he give it to me.:)
  8. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    Sent you a PM regarding the parts you need. Guy got in touch with me and I sent you the thread link as well as his email info.:)
  9. 1980 Buick Member

    Message Count:
    65
    Offline
    Matt: I have a Carburetor in case you missed it ... Let me know.
  10. mattmittenz516 The Reeg

    Message Count:
    74
    Offline
    I seeen,im ubterested how much you want?
  11. 1980 Buick Member

    Message Count:
    65
    Offline
    150.00 *I could have sworn I sent you all info. (inc. #'s) earlier.* Anyway, I'd go through it: Needle / seat, gaskets, float etc... It's very "dusty" and has the PEVR port.
    It's all there except for the choke coil cover. Let me know.
  12. mattmittenz516 The Reeg

    Message Count:
    74
    Offline
    Soundd good to me can u hold it until friday?
  13. 1980 Buick Member

    Message Count:
    65
    Offline
    Absolutely ! "Or the Friday after that" > :)
  14. mattmittenz516 The Reeg

    Message Count:
    74
    Offline
    Thanks alot man, how do i pay ?
  15. 1980 Buick Member

    Message Count:
    65
    Offline
    PayPal ? (To ship I'll need 20 bucks ... *If more I'll eat it) ...
    OR: a money order. ** Either way it's going no-where, and is yours.**

    Let me know.
  16. mattmittenz516 The Reeg

    Message Count:
    74
    Offline
    Alright cool ill pm soon as im ready..I appreciate it


Share This Page

^ Top