We are ready to debut our new line of polyurethane bushings - we call it PolyPerfect, and marks our complete departure from PST's components. We started with a graphite-impregnated bushing. We've switched to a black coating on the shells rather than the typical anodized finish found on PST's and Energy's products that tends to corrode. Squeaking is completely eliminated by grooves that are machined into the bushing in order to better retain grease. This was the final design innovation that truly makes these bushings perfect. Best of all, price will remain the same. Our new EXTREME DUTY Front End kit with PolyPerfect bushings ($399) contains the following: PolyPerfect Control Arm Bushings PolyPerfect End Link kit PolyPerfect Sway Bar Bushings EXTREME DUTY Idler arm EXTREME DUTY Inner Tie Rod Ends EXTREME DUTY Outer Tie Rod Ends EXTREME DUTY Upper Ball Joints EXTREME DUTY Lower Ball Joints (9/16" or 5/8") EXTREME DUTY Center Link We can do $369 shipped to your door (48 US States) for the GP with 10 orders. Kits will be shipped 5 days after the 10th kit is ordered. Guys, this is the heaviest duty kit available, period. It just doesn't get more diesel than this. Once substantial interest is shown, I will make a section of the website to get in on the GP. Post here if you are definitely in.