Flynbye Front C5 conversion bracket question

Discussion in 'Brakes, Suspensions, Tires & Wheels' started by CruizinKev, Dec 26, 2011.

  1. CruizinKev Member

    Message Count:
    71
    Offline
    I also want to bolt on C5 calipers with 13" C5 rotors on front. these pics/spindles are mine ;) :biggrin:

    [IMG]
    [IMG]

    I also got C5 rear calipers laying and looking to get a rear conversion kit with functional e-brake.

    I'm still searching for them C5 conversion brackets. Already sent a few PM/emails to Ed Miller (flynebye.com) but I got no answer.

    Anybody know who else sells them brackets?
  2. Haterade Adsense



  3. novaderrik Active Member

    Message Count:
    4,903
    Online
    make your own brackets- they are just 4 holes drilled in a piece of steel.
  4. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    There's a website that has the blueprints for those on it and you can down load them for free. Found it once but didn't save it.
  5. Dlynch1130 Member

    Message Count:
    31
    Offline
    SCAN0060.jpg

    Hopefully this is a copy of the drawing that you are looking for.
  6. Dlynch1130 Member

    Message Count:
    31
    Offline
    If you cannot see that well enough, send me an e-mail at dlynch@outdrs.net and I will send you back the .pdf file of the drawing.
  7. larry33kc Member

    Message Count:
    672
    Offline
    I would like to see it too. Larry33kc@yahoo
  8. novaderrik Active Member

    Message Count:
    4,903
    Online
    it says "Blazer spindle" on it- is that for the later blazer spindles with the 2 piston brake calipers or the older Blazer/S10 that used the same spindle as a G body?
  9. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    From the measurements I got off the blazer spindles I've got here that's what it's for Derrik.
  10. novaderrik Active Member

    Message Count:
    4,903
    Online
    so it's for the newer or older Blazer spindles?
  11. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    Newer ones Derrik, otherwise I would've put metric spindles.:)
  12. SHADOWII Active Member

    Message Count:
    1,454
    Offline
    I purchased a set of C-5 brakes off of a board member, but have no idea of the mod's required. Is this one of the mod's?
  13. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
  14. ZNix The Hot Head

    Message Count:
    1,460
    Offline
    Im going to make these. Love having a CNC on tap from the School :D.

    Zack
  15. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    You lucky bastard.:) Make a set minus the 2 holes in the center Zack. The reason I say this is for a set up purpose. I'll PM the info to you later about it.:biggrin:
  16. SHADOWII Active Member

    Message Count:
    1,454
    Offline
    Thanks Charlie.
  17. ZNix The Hot Head

    Message Count:
    1,460
    Offline
    Still waiting for the PM :D. If you need anything CNC'ed let me know. All I have to do is pay for the materials themselves. I plan on doing my own Flange for a custom 3"DP with Integral gate and most likely some cool add ons also.

    Zack
  18. charlief1 Just another kinky six

    Message Count:
    15,875
    Offline
    You got one now.:biggrin:
  19. chadswe4 Member

    Message Count:
    162
    Offline
    Sounds good to me.:smile:
  20. 6APPEAL Member

    Message Count:
    899
    Offline
    Looks like the front brake/suspension upgrade that I'm looking for.
  21. CruizinKev Member

    Message Count:
    71
    Offline
    Hey Zack, you already made some of these adapters?


Share This Page

^ Top