1968 Chevelle White with black stripes over hood and trunk Front disc brakes Power steering Power brakes New 1-ball joints 2-springs (moog) 3-KYB shocks 4-brakes 5-window felts 6-wind shield 7-dash Pad 8-recovered seats OE style 9-A-arm bushings 10-quater panels 11-package tray Engine 1987 GN with new timing chain set, oil pump To do the wiring i used a caspers "dash mating wire harness" Brake booster vacuum block. Cotton’s AC delete pulley 1987 GN gas tank and fuel pump The car is not finished yet and these are some things that it might get. and yes these things may affect the price 1-'87 OE IC used as a front mount. 2-rebuilt or good used turbo. The turbo it has now leaks and has play. (in/out-up/down) 3-it has an open 10 bolt rear. I am thinking of putting in a mini spool. not shore yet If I have the time I will install new body bushings And clean and paint the frame
Pictures will be available as the work gets done on the car I do have some before pictures. The car is not finished.
chevelle pics please send pics to wayne98@hotmail.com and you zip code please.thanks,wayne is this a running car yet?
up date 4-23-07 1968 Chevelle White Front disc brakes Power steering Power brakes New 1-ball joints 2-springs (moog) 3-shocks 4-brakes 5-window felts 6-wind shield 7-dash Pad 8-recovered seats OE style 9-A-arm bushings 10-quater panels 11-package tray Engine 1987 GN with new timing chain set, oil pump To do the wiring i used a caspers "dash mating wire harness" 1-Brake booster vacuum block. 2-AC delete pulley 3-GN gas tank and hot wire fuel pump 4-rebuilt stock turbo The car is not finished yet and these are some things that it might get. and yes these things may affect the price 1-it has an open 10 bolt rear. I am thinking of putting in a mini spool. not shore yet If I have the time I will install new body bushings And clean and paint the frame
Well I asked me Dad to please do work on the car. Then this is what I find when I go to my Dads house. With a list of parts needed.
Opinions needed The car is going to be painted white 1-should I paint the fire wall white 2-should I paint the fender wells/ wheel wells in white 3-or should I paint the above in the factory flat black.
I'd stay with the factory colors for the firewall and wheelwells.. I think it had a bit of a satin,. but find out what it is and paint it that. White will be too much under the hood..
The fire wall will be painted white But the fender wells will be painted black. These are some pictures of the frame all cleaned up and painted with POR-15 The under body will also be cleaned and painted with POR-15 then Top-coated white. My Dad wants to paint the rear-end and drive shaft silver so it’s going to be painted silver. Pictures on that as it gets done
