stage 2 motor cost?

[278cikiller]

What would be the cost of a satge 2 motor drop in and turn key? lets say gn1 heads 14 teen bolt, 153 block 3625 crank, 4.035 bore 76 turbo, custom pistons, 70mm throttle body, 83 injectors and roller cam . any in put would be help full thanks.

[49-blues]

You re probably looking at $12K-$15K. i have over $10k into my long block and its not finished yet. headers and turbo are alone $2750. on top of long block.

[SGRIM]

For a new one built by one of the known builders, I would say 20K+ depending on what parts you want in it....

[Nasty Wendy]

How much you got? Its gonna cost a little bit more than that.

[BAGN]

Originally Posted by Nasty Wendy

How much you got? Its gonna cost a little bit more than that.

Truer words have never been spoken.

[Cheeseburger]

Depends on a number of factors, sleeves/bore/welded up cranks etc etc.
If its a nice fresh never blown up motor then it will command a higher doller. If its ex blown up sleeved/windowed with welded up crank journals..........well.......................

[Big88]

I can get you in 270 cu in. all stage 2 with inter cooler fast and torque convertor. For $20,000

[278cikiller]

Thanks for the input guys.

[steveX]

how much is just the BLOCK,CRANK,RODS,HEADS,timing cover?

[BAGN]

Originally Posted by steveX

how much is just the BLOCK,CRANK,RODS,HEADS,timing cover?

Here is a quick Idea for ya,

. . . . USED-NEW
Block 2500-4000
Crank 1100-2300
rods 600-1200
heads 1500
timing cover 200

[shorti28]

I'm selling all my stage 2 stuff and gn1 race ported heads with 1.65 roller rockers, oilpan to throttle body minus crank and a rod for $6,500 spun a bearing and took out the crank and a rod. 3.870 bore ross pistons and I will also sell my pt88 turbo and 83lb injectors. This is a pretty cheap way to get alot of the stuff you need. I am going to a LQ4 motor with a bigger turbo. The block is good block #25500016