![]() |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
MSD7AL-2Plus
Trying to install one of these, using the MSD distibutor and the XFI. Already have the ground plug for the harness and the cam sensor plug adaptor. My question is directions on the ignition box show the M+ and M- plugging directly to the distributor. Do I splice into the cam sensor adaptor plug to run these wires to the ign box, or dont run them to the ign at all, or what?
TIA |
|
|||
|
Quote:
No, you use the white points wire to trigger the box only. I ran power and ground to the battery lugs separate from any other wiring and have had no problems.
__________________
84 T-Type, TSO car Powered by DLS Engine Development 219-956-3653 Big Stuff 3 Twisted 6-PTC converters |
![]() |
| Thread Tools | |
| Display Modes | |
|
|