Go Back   TurboBuick.Com > Tech Arena > Stage II Tech
Reload this Page Wanted: T&D 1.7 -"H" "INDY ROCKERS"
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 28th, 2007, 05:02 PM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
Cool Wanted: T&D 1.7 -"H" "INDY ROCKERS"
WANTED: T&D rocker system 1.7 "H" rockers as shown in pic. These are different than the standard stage 2 rockers, these were for the low-deck
indy blocks with re-located lifter bores and used the square port "indy" heads. These will not work on standard blocks and heads. If you know "ANYONE " that may have a set of these PLEASE CONTACT ME !!!
Top secret project in the works!! Thanks Mike
Attached Images
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old September 4th, 2007, 09:01 AM
Senior Member
  
Join Date: Jun 2001
Location: pendleton indiana
Trader Rating: (0)
Posts: 699
rocker arms
mike, i have a set like those. but the push rods are fastened [swivel] to them. i would trade them for a set that i can use,
__________________
oc ,
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old September 5th, 2007, 05:36 AM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
OC, Im not sure if those you have will work or not. I will call you!! Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old September 8th, 2007, 09:28 AM
Senior Member
  
Join Date: Aug 2001
Location: HOUSTON
Trader Rating: (0)
Posts: 255
Not wanting to whiz on anyone peerade but after you get whatever set together, it would be positive to send them off to T&D for a check.
T&D (most of the time) can rebuild them so's to remove the worry factor or let you know if they are fit to use.
In my case the rebuild saved me the price of shafts and the rest of the pieces were trash, everything was so far out of spec they could not be rebuilt.
What are the #'s on the rockers BTW ?
__________________
pocketchange
Last edited by GARY HARVEY : September 8th, 2007 at 09:34 AM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old September 8th, 2007, 10:04 AM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
Gary, They have both 1.7 and "H" on them Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old October 24th, 2007, 08:06 AM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
ttt There has got to be more of these sitting around!! Please check your
dusty boxes!!! Thanks Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old November 11th, 2007, 12:35 PM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
Anyone have any parts that look like these?? Even if there not 1.7 or "H"
Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old November 11th, 2007, 08:40 PM
Senior Member
  
Join Date: Jun 2001
Location: Laurel, MD
Trader Rating: (0)
Posts: 2,313
Have you checked with the Galina's, since I read that they ran the Indy heads at first on the ss/dx car?
__________________
Regards,
Carl Ijames carl.ijames@verizon.net
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old November 12th, 2007, 11:06 AM
Member
  
Join Date: Oct 2007
Location: tulsa oklahoma
Trader Rating: (2)
Posts: 74
are you sure they only fit the square port heads?
i have a bushel basket full of misc rockers i will look tonight.
have several sets complete where are you im in tulsa call me .
phil k 918 902 0139
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old January 29th, 2008, 09:44 AM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
Indy Style Rockers
Guys, Not having much luck finding any of these. ANYONE have this style in
ANY RATIO????? HELP Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old February 28th, 2008, 07:25 AM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
TTT Still looking Thanks Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old February 28th, 2008, 11:18 AM
Senior Member
  
Join Date: May 2001
Location: NYC
Trader Rating: (4)
Posts: 7,084
Mike- did you get the ones i sent you?
__________________
87 Stage2 in the works!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old February 28th, 2008, 01:07 PM
Senior Member
  
Join Date: Mar 2004
Trader Rating: (2)
Posts: 602
49 blues, Yes I got them -Thank you. Those are the normal rockers for stage 2 heads. The ones im looking for "HERE " are different.
Still looking!!!! Thanks Mike
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Board members "Quick6'n'-K.C." and "8UWITH6" feature cars for the month of October. 86brick Turbo Video's and Picture Library 24 December 5th, 2006 09:28 PM
"NEW" SOUTH SIDE MACHINE LIFT BARS "NEW" purepower Parts for sale 1 November 26th, 2005 11:18 PM
Original "sheen" or "glossy-ness" of GN/WE4 bumpers? YGETV8 Show Car and Restoration/Body Repair 6 August 3rd, 2003 08:51 AM
Do NOT post "Parts Wanted" or "Parts For Sale" ads in this forum! Geoff87 Junkyard Dogs 0 March 17th, 2003 05:10 PM
"Turbo Six Tuner" versus "Tunercat" chip tuning software... Irid Computer Chips 101 8 August 14th, 2002 12:26 AM


All times are GMT -5. The time now is 12:44 AM.

Powered by vBulletin Version 3.6.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0
One of the largest message boards on the web !

Contact Us - TurboBuick.Com - Archive - Top