Go over to the tranny section of this board, there are a few really good guys that are vendor's on here (pay to advertise and sell there...
Good Stuff, thanks Eric and Bob, for all the time and effort to bring out this new product for our addiction.... Chuck
60's with alky go a long way, need a chip (many run turbo tweak chips from Eric Marshall @ turbotweak.com ) each time you change injector size, most...
I had the same goal as you do, not sure on your budget but like Clint was saying, it really is less expensive to do the engine build correct the 1st...
Same over here, harbor freight gauge set, vacuum pump that ran off my air compressor, also took my lines to a radiator shop and they replaced the...
Thanks Brian, I didn't know his name. greeneyegi - at this site http://www.vortexbuicks-etc.com/ go under "trouble shooting" look for the "no...
The Ignition Modules are now all a crap shoot, you need a Casper Tester to see what's working... If money is not a object I recommend Bob Bailey's...
No the ECM is the "Electronic Control Module" or commonly called the "computer" it located at the passengers right foot, behind the kick panel. The...
make sure your alternator is functioning properly, if the "diodes" are going bad they will spike your system with a/c current instead of d/c, very...
Aaron, Like Bryan said, honestly it was a plug and play, drop the old heavy weight, put the 96 vette starter in it's place, hook up battery, turn...
Off to Advanced Auto to get mine..... under $100 after core is returned, lifetime warranty... Update, bolted right in, wires are a little tighter...
Big Joe, Here is a link that explains all the readings http://turbotweak.com/scanmasterinstructions.pdf Chuck
Congratulations Adrian87 !! Crazy Power for the street !! Chuck
Thanks Guys !! After my oldest son Travis put his spin on the video [media] Chuck
With Bison at the Nat's with the 6262 journal bearing. We could have turned it up more, as in 11.2 a/f and more boost but, 8 hrs from home. [media]...
I'm not sure if you remember but, when I was building this motor, I asked your opinion on a number of issues, like how would the motor would like...
Also running PTC non lock on the street (Bison's recommendation), drove car 300 miles one way to turbobuick.com nat's and back, no problems. Old lock...
Millerman57, Here is a link to your full size photo 6000x4000 pixels...
I was at the "unvieling" at Richard Clark's tech session, Bob and Eric talked about it. It was described as a "poor man's fast system", switching...
Here is a good read for the Scan Master, explaining the different parameters and the values that you should be seeing.......
Separate names with a comma.
