If your gonna change pistons and rods might as well get a 6.0
Quick rant about fedex I shipped 2 things last week and used my debit card to pay for it when I got home later and checked my bank account they...
not in the rust belt {atlanta} no inspection required I should have taken a pic of the 2000 GTP that hit the yard while I was there last week...
Why are they being scrapped in the first place they are not wrecked some of them look downright decent good paint no dents interior ok
The junkyards I go to have at least 6 series II supercharged buicks and grand prixs I usually take the injectors out of them it's funny you can't...
the L33 alum 5.3 in 2005 and newer 4x4's is just plain badass.Good heads,nice thick block take a look on car parts .com lot's of them available in...
I trimmed the flange off them and I see the driver side working out but the passenger side needs to be cut back a whole lot more and the outlet angle...
be thankfull your not in another country a guy from Australia wants to buy a vacuum brake booster and petal I'm selling both ups and fedex say $230...
Dirt cheap 5.3 stock LS1 cam from 98 vette pac behive springs pushrods ARP rod bolts because I already had them ARP head bolts LS9 head gaskets GT45...
I sold my 6.0 and bought a 04 5.3 with 80k miles for $100 of of craigs list.It had 2 dead lifters because the guy never changed the oil.Pulling it...
has anybody run a 7th injector on e-85 to take more of the heat out how can e-85 be that effective with only a short distance between the injector...
You need the pushrod cup that comes on the s-10 it holds up the pushrod and will not let it lose contact with the master I tried an s-10 manual...
The GM 670 box is what every one wants now it's 6lbs lighter than stock and smaller in size I know the 99 and newer chevy trucks have one I don't...
So if you already have the blazer spindle and sealed bearing hubs you still need an adapter plate to mount the camaro calipers I see flyinbye has an...
I use a grand cherokee steering box and steering shaft on my cutlass the box is fast ratio but does not have as heavy of a feel as the gn box.I...
cool thanks for the info I see a lot of f- body 3800's for sale with "siezed" motors I'm ready to buy any series 2 that's cheap and the...
I've been looking at plenty of them here in the junkyards of Atlanta whats up with the super charger when it has a lot of play in the pulley does the...
$1500-2000 is the lowest they go here in georgia I have been looking for one for less than a grand for a while I think I am getting closer I have...
converter has been sitting for 10years with fluid in it it worked on the t-type this is an older car 1 wire 4th gear lockup I even tried 12v through...
before I pull the unit and change the torque converter what can I check with the valve body I have allready changed the solenoid,the lockup valve is...
Separate names with a comma.