What is an optimum ring gap for a stock bore and stock turbo piston? .010-.020 seems vague. I will be using speed pro moly top ring and cast 2nd...
What is the optimum ring gaps for a stock 3.8L piston in a standard stock bore? .010-.020 seems vague to me. I will be using Sealed Power moly top...
Can someone give me pointers on how to install new aftermarket inside sweeps. Looks like the original sweeps are stapled on to the upper door panel...
I need both sides of each, let me know what you got
Have any of you guys had a need to restrict some oil going to the turbo? I have had an ongoing problem with my modded TA49 getting oil on the cold...
Ditto on the alerts
The wife and I will be showing up weather permitting Sunday. The Buick is getting ready for paint, so we will be spectators Also
Check this link out, I was able to get my $50 off a case through here... FREE Case of Valvoline VR1 Racing Synthetic Motor Oil (after rebate)
Allblackcars, I could use the drivers side if you find someone that doesn't want to split a set up.
I got my clips at Carquest, the dealer may be able to get you these too.
Check this link out to see why your engine light is on. Malfunction Codes Reference
I used this from Autozone for an adjustable cooling relay, just ask for them at the counter, they should have them in stock in back. Compressor...
Reason I am asking about the primer is about 7 years ago I painted my GN with Omni black with Omni clear. Well for the most part of those years the...
What primer is everyone liking now days under PPG single stage DCC9300? K36 still good? I read in some post somewhere there was something better,...
Go to Buick Regal Grand National – T-Type Bumper Filler Sets | Danko Reproductions They are 20% off for a limited time and lots of guys on here have...
Very interested in the turbo tweak chip, I will pm you for more info...
Can someone please link me to some good directions on replacing my drivers window. I took the whole assembly apart way too far trying to replace my...
Put me in line for the wheels please.
Ken Mosher always suggested using the IOGEAR USB cable GUC232A, I have tried several serial cables that just did not work right but this cable...
I am still running the 84 coil pack on my car and the cylinder that the wire goes to is actually stamped on the coil towards the bottom of the...
Separate names with a comma.
