Set of three original manuals: the "general" owner's manual, warranty manual, and stereo system manual. All are in good condition with normal wear,...
Hi! Can anybody help me out with a Carfax? Below is the vin and my email for the reply. Many thanks! ;) VIN# JHMZE13761T000459...
Car is sold. Thanks everybody! :)
Another good trick when you need to move a heavy piece of furniture for cleaning or whatever: Slip old towels underneath it and slide across the...
Just thought I would post this here too, in case you don't catch it in the "for sale" forum... Well guys, after much careful thought, I've decided...
Somewhere recently I read about a website where you can check the consumer satisfaction ratings of individual car dealerships. Maybe I read it here....
Thanks for the feedback, guys. Actually, I do know about the "premium only" advice since I also swapped in a TR dash. Anyway, I'll take all your...
I recently installed an AFPR and trying to get comfortable tuning with it. What I'm wondering is, how does fuel pressure affect mpg? I'm assuming...
Seems to me the key works in that EO ruling are "self contained." What does that mean? Does it mean an open-element K&N breather, or does it mean a...
Well, lowering the car and giving it a slight forward rake would be the place to start. Then it would be fairly easy to build a front air dam...
Those stencils are pretty cool, especially the flame one. But it looks like that could get expensive in a hurry if you have to buy that stuff by the...
A couple thoughts: Make sure the laptop is plugged into the wall and not just running off batteries. Most laptops run at lower speeds when drawing on...
How about this: --Dark red bottom --Checkered flag middle strip --White or light grey top I'm redoing my garage soon, so this is on my mind...
Actually, the GTA rears WILL fit on a G-body, you just have to swap them: rears on the front, fronts on the rear. You may get some rubbing in the...
Thx for the tip, Jim. I'll give your method a try.
While testing my wagon just after dropping the motor/tranny in, I had it up to 110-115, as shown on Tlink. This was on my own d-i-y front wheel...
Drewster: Got any photos or drawings of your setup? I'm interested but it's hard for me to picture it from your description. Thx!
A while ago I spotted a tool that allows you to separate the front ball joints without using a pickle fork. It's sort of a vice-like thing that you...
Dude, if you are not already in your car on your way to hook up with this lady, there are probably about 400 guys on this thread about to beat you...
I agree with Todd. Suck it up and move on.
Separate names with a comma.
