Th200 4r 3rd gear port where is third gear pressure port in a TH200 4r tranny? Are there any picture or diagrams on the net?:confused:
I spent a long time banging on the rear drums to remove them. After getting them off I noticed a spot on the back of the plate that holds the...
Thank you, I really needed the info. I spent a lot of hours searching for the items. Point of info is in reading the tread i came across the CK site...
Junior Member Also, where can the connector, wire, & pressure switch be purchased from?
Junior Member Thanks! I feel much better now. However, I do not know what an 1/8 NPT tap is, please explain. Do have any ref numbers & names for the...
I just installed the tranny. Does this mean I have to pull the tranny out to change it from a 3 plug connector to the 4 plug connector using the...
I purchased the car without a trans in it. The trans model year is 1986. Is there a good supplier for the shift kit, and servo you are speaking of? I...
Thank you Mikestertwo i got it done.
Thanks! I new at this any details on process, i.e. do I spray the whole can down the ? line for internal cleaning?
Is there a shade tree method for cleaning the trans lines?
Thank you for the reply. My 87 GN is a bone stock car and will stay stock. I want to become a good shade tree tuner (I will explain this later)....
I am a true blue newbe (for the sake of brevity I will leave it at that!) and I purchased a KZF 200-4r tranny. Installed it only to find out that the...
Is their an after market tube & dip stick that can be installed that does not require removing the trans.?
I have been out of commission for the last few weeks, but I am back and ready to go. I am still installing my trans. my current problem is that I...
I had the same identicle problem. I tried using several diff things that did not work. Found a fuseable link (work great now!) from a small auto...
Where can I learn about this sleeve thing, i.e., I don't have a clue of your stated advice meaning. I purchased a 87 GN that has a stage 1 engine...
What kind of gasket did you use with the heads you ported?
Thank you Just a Six! Will I damage the engine, i.e., do I leave the tranny bolted to the engine?
Hello everyone! I am new to this internet conversation process, and I am also new to working on cars. Thanks to debigguy for pointing in the...
Hello, I am a new member. My first time pulling a transmission too! However, putting it back is a problem; I can not seem to get the rear of the...
Separate names with a comma.
