just installed new pump, direct plug in and pump is not running. checked fuses (good). hot wired at alternater and pump still not running, but can...
New plugs, wires, coil pack and module and car has started to cough when boost starts to come up. under normal driving conditions car seems to be...
Just to catch everyone up..car would crank and run fine until it warmed up and would start missing and eventually shut down, not cranking until...
I think my module is fried and just want to make sure by asking some trained professionals. When I changed the coil pack, I noticed how sticky the...
I thought I had a water problem, but not really sure now. I drained tank, changed two filters and now have new gas in car and car is still acting...
mid to top of 2nd gear, car is falling on its face. the only tuning system I have is a scanmaster and stock digital tach in dash. I plan on hooking...
I got gas a while back and just down the road car started missing and could barely run, limped it to the house to remove gas from tank finding some...
it;s been a while since running my car so I don't have the definite #'s, but me and my buddy were playing around one night at the strip and our two...
when I turn key on it gives me a 02, then it goes to straight 8's across screen and when car is running I get nothing except a blinking light.(little...
i've got a friend who is wiling to let me use his translator pro which has never been taken out of the box. what do I need in order to hook this up...
sig below, went to track last night and car just wouldn't 60'. I've been 1.61 without boost and last night car was only doing 1.8 60' with 3-5# of...
Car will not build any boost on line. Just recently got motor back together and finally got a chance to take car back to track. Car has s-10 brake...
went out to take car to local drag strip Saturday night only to find out that my cat wouldn't start. just recently rebuilt engine and have been...
When connecting rods are attached to piston, I know that certain markings on piston are suppose to go with marking on rod towards front of engine....
In process of rebuilding engine after wiping #3 rod journal. Cleaned crank by turning .010" . Engine builder was looking at connecting rods today...
Trying to get all my parts together to put motor back together and I'm thinking about changing cams. Stock crank, rods, pistons. I put a GN107...
I hear differences of oppinions on what bolts you should replace when rebuilding a engine. What bolts can you reuse if any? I had planned on...
We'll, drove car to work yesterday and ended up racing a co-worker that has a 6 speed vette that supposedly has had some work done to it and he had...
Has anyone here every had their wife or girlfriend tell you that you stink. Before I started running racing fuel my wife would always complain about...
I know a family that has a 87 GN Hardtop, loaded with less than 30k miles that is interestested in selling it. Car is in excellent shape. The only...
Separate names with a comma.
